Growatt MIN 2500TL-XH Bedienungsanleitung

Growatt Nicht kategorisiert MIN 2500TL-XH

Lies die bedienungsanleitung für Growatt MIN 2500TL-XH (9 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 12.5 Bewertungen. Hast du eine Frage zu Growatt MIN 2500TL-XH oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/9

Energy Storage System Operating Mode Setting



Global Leading Inverter Brand

1.33+million 200+ 70+ 100+

Inverter Ship Globally Professional R&D Engineers Patents and Copyrights Countries with Systems Installed

1、 Inverter Models

After TL-XH series connect with BDC, the time period of the BDC can be set.

The following models include in this series:

MIN 2500TL-XH MIN 3000TL-XH MIN 3600TL-XH MIN 、、、MIN 4200TL-XH、

4600TL-XH、MIN 5000TL-XH、MIN 6000TL-XH

Please make sure the inverter is the latest firmware version and is a single-phase

inverter model with RS485 port.

2、 Operating Mode Setting

The BDC time setting function enables the inverter to run different modes in different

time periods. The modes that can be set include: load first, battery first and grid first.

In the battery first mode, if you need to take power from the grid, please enable the grid

charging function in advance.

Note: When the BDC time is set, the start time of the latter period must be greater than the end time

of the previous period.

3、 Setting

Please ensure that the inverter and BDC communication are normal and in the on-grid

state. After set the BDC priority time period and enable the grid charging function, the

inverter will run continuously according to the set priority mode and time period. This

document describes four BDC time setting methods.

3.1. Setting through OLED

OLED

Touch

Button

instructions

The inverter can support multiple touch modes: single touch, two

consecutive touches, three consecutive touches, and long press 5S.

Different touch methods have different functions. Advanced setup

password: 123

Touch Methods Definition

Single Touch Move、page turning or number add 1

two consecutive touches Enter setting mode or confirm the setting

Three consecutive touches Return to the previous page

Long press 5S Data zeroing

Table.1. OLED Touch Button instructions

The OLED can only set three time periods, and the start time of the latter time period

must be greater than the end time of the previous time period.

First a single touch to enter the "Set Parameter" interface, select "Advanced " and enter

the password, press twice to enter the "Storage Setting", select "Time Period" to set the

BDC priority time period: first select the priority mode, Touch twice to enter the time

setting, select whether to enable the setting, and then touch twice to set successfully.

The schematic diagram of the OLED flow is as follows:

Time Period Loadprio 00-01

Time1: Disable

Loadprio 00-01

Time1: Disable

Batprio 00-01

Time1: Disable

Gridprio 00-01

Time1: Disable

Loadprio NN-01

Time1: Disable

Loadprio 00-01

Time1: Disable

Loadprio 00-NN

Time1: Disable

Loadprio 00-01

Time1: Disable

Loadprio 00-01

Time1: Enable

Multiple single

touch

Multiple single

touch

Multiple single

touch

Double touch Double touch Double touch

Double touch

Double touchSingle touch

Single touch

Loadprio 00-01

Time2: Disable

Loadprio 00-01

Time2: Disable

Batprio 00-01

Time2: Disable

Gridprio 00-01

Time2: Disable

Loadprio NN-01

Time2: Disable

Loadprio 00-01

Time2: Disable

Loadprio 00-NN

Time2: Disable

Loadprio 00-01

Time2: Disable

Loadprio 00-01

Time2: Enable

Multiple single

touch

Multiple single

touch

Multiple single

touch

Double touch Double touch Double touch

Double touch

Double touchSingle touch

Single touch

Double touch

Loadprio 00-01

Time3: Disable

Loadprio 00-01

Time3: Disable

Batprio 00-01

Time3: Disable

Gridprio 00-01

Time3: Disable

Loadprio NN-01

Time3: Disable

Loadprio 00-01

Time3: Disable

Loadprio 00-NN

Time3: Disable

Loadprio 00-01

Time3: Disable

Loadprio 00-01

Time3: Enable

Multiple single

touch

Multiple single

touch Multiple single

touch

Double touch Double touch Double touch

Double touch

Double touchSingle touch

Single touch

Double touch

Strorage Setting

Password

123

General

Advanced

Country/Aera

VDE0126

Double touch

Set Parameter

Double touch



Figure.1. OLED Setting Flows

Produktspezifikationen

Marke:	Growatt
Kategorie:	Nicht kategorisiert
Modell:	MIN 2500TL-XH
Bildschirmtechnologie:	OLED
WLAN:	Ja
Breite:	375 mm
Tiefe:	160 mm
Produktfarbe:	Weiß
Internationale Schutzart (IP-Code):	IP65
Höhe:	350 mm
Energieschutzeigenschaften:	Over voltage, Short circuit
DC input Spannung:	500 V
Eingebautes Display:	Ja
Betriebstemperatur:	-25 - 60 °C
THD, totalklirren:	3 %
Ausgangsstrom:	11.3 A
Max. Leistung:	2500 W
Eingangs-Betriebsspannung (min):	70 V
Eingangs-Betriebsspannung (max):	500 V
Ausgangs-Betriebsspannung (min):	180 V
Ausgangs-Betriebsspannung (max):	280 V
Output Frequenz:	50/60 Hz
Anzahl der Phasen:	1
Startspannung:	100 V
Kapazität Ausgangsleistung (max.):	2.5 kVA
Maximale Eingangsleistung (DC):	5000 W
Kurzschlußstrom pro MPPT (max.):	16.9 A
Wirkungsgrad (EU):	97.1 %
Überspannungskategorie:	CAT II
MPP-Spannungsbereich:	70 - 500 V
Anzahl der Strings pro MPPT:	1
Maximaler Eingangsstrom pro MPPT:	13.5 A