Hager 75441326 Bedienungsanleitung

Lies die bedienungsanleitung für Hager 75441326 (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 46 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Hager 75441326 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

CO2-sensor

Order No. : 754413xx

Operation- and

Assembly Instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Failure to observe the instructions may cause damage to the device and result in fire and

other hazards.

Do not use for safety-related gas measurements.

During renovation work, protect the device against soiling through paint, wallpaper

paste, dust, etc. Device can be damaged.

Only operate the device with cover. Device fault possible due to electrostatic discharge.

Do not clean or store the device with organic solvents or expose it to their vapours. Do

not stick any adhesive labels. Do not store device in packaging or environments that

contain softening agents, e.g. bubble wrap or polystyrene. Before starting renovation

work, remove the device from the system and store it in a suitable place. The function of

the humidity sensor may be permanently impaired.

Danger of electric shock on the KNX installation. Do not connect any external voltage to

the inputs. Doing so may damage the device(s), and the SELV potential on the KNX bus

line will no longer be available.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Device components

Figure 1: Device overview

(1)Terminal insert

(2)Design frame

(3)Electronics cover

(4) Cover

(5)Programming button and LEDs

(6)Locking screw (plastic)

(7)Sensor window CO2 sensor

Page 1/5

CO2-sensor

32577101

6LE001510A 14.07.2015

KNX

Produktspezifikationen