Hager SF463 Bedienungsanleitung


Lies die bedienungsanleitung für Hager SF463 (1 Seiten) kostenlos online; sie gehört zur Kategorie Schalter. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 4 Bewertungen. Hast du eine Frage zu Hager SF463 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
This modular changeover switch is not a disconnector.
The isolation must be ensured with an appropriate
device. The changeover incoming must be protected
against short circuit with an appropriate MCB 63A - 6kA
- C curve.
NOTE 1: In Australia and NZ, the Main Supply Neutral
upstream of the MEN connection is NOT allowed to be
switched. (AS/NZS 3010).
z
Modular changeover 63A
with centre OFF position
SF463
R
L1
III
G1W
L2
III
G2B
L3
III
G3N
N
III
GN
L3
L2
L1
N
L2
L3
L1
Generator Set
Normal Supply
MAIN SWITCH BOARD
Outgoing
Incoming
Main Neutral Link
SF463
Installation
main switch
*
*
May also be a
circuit breaker
To electrical
installation
GS
Check power
protection
Alternative supply generator: typical location of manual changeover device with centre "off" position in the main
switch board.
NOTE 2: Refer to AS/NZS 3000, 3010 and
local Service and Installation Rules for specic
requirements.
Hager Electro S.A.S., Boulevard d'Europe, B.P. 3, 67215 OBERNAI CEDEX, France - www.hager.com
OCOM 129414Hager 09.176S5503d
6S5503d
1

Bewerten Sie dieses Handbuch

4.5/5 (4 Bewertungen)

Produktspezifikationen

Marke: Hager
Kategorie: Schalter
Modell: SF463

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hager SF463 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten