Hager WBWSV3 Bedienungsanleitung


Lies die bedienungsanleitung für Hager WBWSV3 (1 Seiten) kostenlos online; sie gehört zur Kategorie Wandsteckdose. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 17 Bewertungen. Hast du eine Frage zu Hager WBWSV3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
Hager Electro Pty. Ltd. - Unit 1/170 Power Street Glendenning NSW 2761 - Tel. 1300 850 253 - Fax. 1300 424 372 - www.hagerelectro.com.au WIS0007C10
WIS0007C10
WBWSXX
117
77 25
Specifications
Rating - 10A, 240V
IP rating - 66
Switching - 2 way
Installation Instructions
All hagerblu IP rated switches MUST be installed as per manufacturers
instructions to maintain the integrity of the IP rating
When mounting the switch, ensure the surface is:
- Smooth & flat
- Free of dust or grime
- Must be non porous
Ensure there are no gaps between the sealing gasket and the wall surface.
If fitting to a wall box or stud mounting bracket do not use any other
screws than the screws provided with the fitted ‘O’ ring.
Ensure the stud mounting brackets or boxes are below the surface.
If fitting to a solid wall using the alternative mounting holes, place the
bungs provided in the standard 84mm mounting holes.
Failure to follow the manufacturers instructions will void any warranty offer.


Produktspezifikationen

Marke: Hager
Kategorie: Wandsteckdose
Modell: WBWSV3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hager WBWSV3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten