Hanwha XRN-6420DB4 Bedienungsanleitung


Lies die bedienungsanleitung für Hanwha XRN-6420DB4 (7 Seiten) kostenlos online; sie gehört zur Kategorie Videoaufzeichnungen. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu Hanwha XRN-6420DB4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/7
NETWORK VIDEO RECORDER
Quick Guide
XRN-6420DB4/XRN-6420B4/XRN-3220B4
2
Package Contents
■
The appearance of the components may differ from the image shown.
■
Accessory category and quantity may differ depending on sales region.
■
Recorder Mouse Quick Guide
Power Cable (2 ea)
(XRN-6420DB4)
Power Cable
(XRN-6420B4/XRN-3220B4)
Terminal Block (2 ea)
Front Cover Lock Key HDD Fixing Screw (64 ea) Anti-slip Rubber Pad
Hard Disk Number Sticker
English
Hanwha Vision Co., Ltd. is a surveillance camera manufacturer that provides video information equipment
with various functions. Users must comply with local laws when using our devices. Users are solely responsible for
any illegal use of our products.
CAUTION
●
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
●
Do not ingest battery, Chemical Burn Hazard.
●
This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can
lead to death.
●
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from
children. If you think batteries might have been swallowed or placed inside any part or the body, seek immediate medical attention.
ATTENTION
●
IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE TYPE INCORRECT.METTRE AU REBUT LES BATTERIES USAGÉES
CONFORMÉMENT AUX INSTRUCTIONS.
●
Ne pas ingérer la pile, risque de brûlure chimique.
●
Ce produit contient une pile de type bouton/pièce de monnaie. Si la pile de type bouton/pièce de monnaie est avalée, elle peut causer de graves
brûlures internes en seulement 2 heures et peut entraîner la mort.
●
Gardez les piles neuves et usagées hors de portée des enfants. Si le compartiment de la pile ne se ferme pas correctement, cessez d’utiliser le produit et
gardez-le d’atteinte des enfants. Si vous suspectez que des piles ont été avalées ou insérées dans une partie du corps, consultez un médecin sans tarder.
Installing the HDD
■
If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD manually in the
set before use.
■
If you wish to replace or add an HDD, contact your dealer or our customer service first.
1
Use the front cover lock key to unlock the cover.
Grab the front cover with both hands and pull it
to the left to remove it.
2
Press the orange button on the hard disk bracket
to the left and pull forward to separate the main
body and the hard disk bracket.
3
Mount a HDD in the HDD bracket and screw it in
using the screws provided.
4
Once the HDD is mounted in the bracket, push
the bracket into the main body and close the front
cover.
■
Fit the front cover into the right notch of the main body, then
press and close until you hear a 'click'.
■
Use the front cover lock key to lock the front cover so that it does
not get separated.
3
Installing the Rack
Rack Installation Requirements and Reference Dimensions
Classification Requirements
Rack type 19-inch rack of EIA-310-D standard
POST count 4
POST distance Depth 800 mm
Dimensions of mounting flange
Product
Product
Product width
EIA-310-D standard mounting flange
●
Notable dimensions
Index Dimension
A450 mm (17.717 inches) min.
B465 mm (18.307 inches) nominal
C483.4 mm (19.031 inches) min.
●
Flange mounting holes (square holes are recommended for XRN-6420/XRN-3220 series)
While EIA-310-D standard allows the mounting flange holes to be round, square, or tapped (threaded), the
XRN-6420/XRN-3220 series is only designed to work with round or square holes, but not tapped holes.
●
Square mounting holes
15.90 mm (0.625 inches)
15.90 mm (0.625 inches)
12.7 mm (0.50 inches)
9.5 mm (0.375 inches) Square
44.45 mm (1.750 inches)
15.90 mm (0.625 inches)
15.90 mm (0.625 inches)
12.7 mm (0.50 inches)
Recommended rack dimensions
Rack front
Rack back
Back mounting flange
Recorder
Front mounting flange
Index Dimension Description
A28 mm Recorder front dimension
B560 mm Recorder product dimension
C51 mm Offset distance between mounting flange and rack front
D617~730 mm Offset distance between mounting flanges
E800 mm Rack depth


Produktspezifikationen

Marke: Hanwha
Kategorie: Videoaufzeichnungen
Modell: XRN-6420DB4

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hanwha XRN-6420DB4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten