Hawke Nite-Eye 2000 Bedienungsanleitung
Hawke
Nicht kategorisiert
Nite-Eye 2000
Lies die bedienungsanleitung für Hawke Nite-Eye 2000 (13 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 14 Bewertungen. Hast du eine Frage zu Hawke Nite-Eye 2000 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/13
NITE-EYE 2000
3
OVERVIEW
• The Hawke Nite-Eye 2000 digital camera can be used for observation and photo/video capture in
complete darkness or low light conditions.
• View up to 200 meters in complete darkness using digital night vision technology.
• A built-in infrared illuminator provides additional light when in darker conditions. The infrared
strength can be adjusted to suit your situation.
• Quick and easy transfer of photos/videos and battery recharge via USB.
• Rechargeable 18650 lithium battery for extended performance and runtime.
BATTERY INSTALLATION
Unscrew the battery cover located underneath the front lens. Insert a 18650 battery, negative end
rst, then screw the battery cover back in place.
Notes:
• Only use 3.7V 18650 rechargeable batteries.
• Ensure the battery has sufcient charge.
• Ensure battery has been inserted negative end rst.
• Ensure the battery is charged before rst use to increase life expectancy.
4
RECHARGING
The Nite-Eye 2000 is powered by a 18650 lithium battery. The battery can either be recharged in
the Nite-Eye 2000 unit, or separately if using a battery charger (not supplied).
• To charge the battery while installed in the camera, connect the power adaptor to the USB cable
and insert this into the mini-USB socket on the Nite-Eye 2000, located on the underside of the
unit, beneath the rubber ap.
• The LED charging indicator next to the mini-USB socket will glow red while the battery is
charging and turn off when it is fully charged.
• When recharging from mains power supply the Nite-Eye 2000 will automatically power on. If not
needed, the camera can be powered off by pressing and holding the “ON/OK” button for 3 seconds.
• The Nite-Eye 2000 can also be charged by connecting directly to a computer via USB. In this
mode data transfer will also be available.
MEMORY CARD INSTALLATION
• The Nite-Eye 2000 accepts micro SD memory cards only.
• Memory card capacity between 2GB-32GB only.
• Install the micro SD memory card into the memory card socket located on the underside of the
unit, beneath the rubber ap.
• Install micro SD memory card with exposed contacts rst and facing outwards.
Produktspezifikationen
| Marke: | Hawke |
| Kategorie: | Nicht kategorisiert |
| Modell: | Nite-Eye 2000 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hawke Nite-Eye 2000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Hawke
3 September 2024
3 September 2024
Bedienungsanleitung Nicht kategorisiert
- Reishunger
- Prexiso
- Swarovski Optik
- Barber Tech
- Avinity
- Kopul
- KoolScapes
- GFB
- Reolink
- Hanwha
- Oliveri
- Olivetti
- Propellerhead
- Vonyx
- Beyerdynamic
Neueste Bedienungsanleitung für -Kategorien-
10 August 2025
10 August 2025
10 August 2025
10 August 2025
10 August 2025
10 August 2025
10 August 2025
10 August 2025
10 August 2025
10 August 2025