Hegel P2A Bedienungsanleitung
Lies die bedienungsanleitung für Hegel P2A (7 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 5.5 Bewertungen. Hast du eine Frage zu Hegel P2A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/7
Hegel P2A
High End Pre Amplier
www.hegel.com info@hegel.com
USER GUIDE
Congratulations on your new HEGEL!
Our products are based on a simple philosophy:
The component shall reproduce the original musical sound, purely and naturally.
It uses Scandinavian design reecting natural music reproduction and styling to t in with any interior.
The products are easy to operate and are manufactured according to the best quality principles.
All HEGEL products are created with acoustical instruments in a concert situation as point of
reference. The music is reproduced exactly like the original and is limited only by the quality of the
recording.
Our aim is to give you the best possible music experience!
SOUND ADVICE
The Hegel P2A Pre Amplier is easy to connect and operate and requires no prior technical
knowledge. However, to get the most out of the amplier's superior sound and music quality, we have
provided a brief description of the connections and use of the amplier in order to provide a total
music experience.
We recommend keeping this user guide for future reference.
GENERAL USE
The amplifier is switched on with the button in the middle of the front panel. A blue light indicates it is
switched on. To the left the channel selector with selections: Balanced, DVD, CD, Tape, Tuner and
Auxiliary and to the right the volume control. The selected input is indicated by a blue light.
When the mute button on the Hegel Remote Control is pressed the amplier outputs are muted. Mute
is indicated by a ashing blue power light. To go back to normal operation press the mute button one
more time.
Avoid connecting input cables or selecting inputs with the source selector switch if the volume setting
of the amplier is not fully turned down. A transient signal might then arise, which can damage the
speakers. The amplier will not be harmed, but to avoid overloading the speakers, the volume should
be turned fully down or the mute function should be switched on when connecting and disconnecting
cables.
After the amplifier is switched on, there is a delay the music signal willbe e for reach the amplifier
outputs.
Produktspezifikationen
| Marke: | Hegel |
| Kategorie: | Nicht kategorisiert |
| Modell: | P2A |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hegel P2A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Hegel
2 September 2024
7 Juni 2024
7 Juni 2024
7 Juni 2024
7 Juni 2024
7 Juni 2024
7 Juni 2024
7 Juni 2024
7 Juni 2024
7 Juni 2024
Bedienungsanleitung Nicht kategorisiert
- Millennia
- B.E.G.
- CAD Audio
- Solo
- Narva
- Elektra Bregenz
- Starlink
- Argoclima
- Jackery
- Sungale
- TechN
- Crimson
- K&K Sound
- Instant
- Anthem
Neueste Bedienungsanleitung für -Kategorien-
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025