Heidenfeld DT100 Bedienungsanleitung

Lies die bedienungsanleitung für Heidenfeld DT100 (2 Seiten) kostenlos online; sie gehört zur Kategorie Thermostat. Dieses Handbuch wurde von 49 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 25 Bewertungen. Hast du eine Frage zu Heidenfeld DT100 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

PLUG-IN ROOM TEMPERATURE CONTROLLER

Model HY02TP

Thank you for choosing THERMOSTAT. This programmable electronic temperature controller will provide

you with comfortable home environment and will help you to save energy.

QUICK START-UP GUID E:

Plug THERMOSTAT into power point. Press Power button once a display showing current ROOM –

temperature and SET temperature will come up. By pressing Up or Down buttons select your desired SET

temperature. Plug your heater into Heatermate. If child lock is activated press/hold Down button for 3

seconds then release to unlock.

BUTTONS EXPLAINED:

NO.

symbols

Represent

1

Power ON/OFF

2

Short press to switch between manual and automatic control

Press/hold for 3 seconds then release to enter into set clock and timer mode.

3

Press to Enter/Conrm

4

Increase (Up) Button

5

Decrease (Down) Button

6

Indicator

Light is ON -- power to heater is ON; light is OFF power to heater is OFF. --

DISPLAY SYMBLES EXPLAINED:

NO.

symbols

Explanation

1

Automatic control mode (manual control is not showing) “”

2

Manual control mode (automatic control is not showing) “”

3

Heating mode; “” is displayed when power to heater is ON

4

Cooling mode; “” is displayed when power to air conditioner or fan is ON

5

6 periods programmable icon

8

Room temperature

9

Child lock: activated automatically after 10 minutes of inactivity. Press/hold Down button

“”for 3 seconds then release to unlock. Repeat the same procedure to lock.

10

Ventilation mode turns heater o for a period of time during room ventilation (opening –

windows) when room temperature drops below a specied temperature.

11

Clock setting icon

DISPLAY OVERVIEW:

SETTING UP CLOCK AND TIMER:

Setting Screen

1) Clock Setting

Press/hold “” for 3 seconds then release to enter into setting screen (as above) - ashing. P“” iconisress “”

to enter into clock setting mode which displays minute, hour and day of the week. Minute is ashing.Press “” or “”

to adjust value. Press “” to conrm and switch to hour and day of the week. Press “” or “” to adjust their values.

Press “” button to save all clock settings and return to previous screen.

2) Timer Setting

Press/hold “” for 3 seconds then release to enter into setting screen. Press“”to choose“”(will ash) to set

time of timer switch ON time. P to adjust value. Pressto choose and set tim switch OFF ress “”or“”“” “”er

timePressto save.cancel tim function press to set both and times . “” Toer””to 00:00.

Produktspezifikationen