Hifonics Elite BZE65CX Bedienungsanleitung

Lies die bedienungsanleitung für Hifonics Elite BZE65CX (2 Seiten) kostenlos online; sie gehört zur Kategorie Autofreisprechanlage. Dieses Handbuch wurde von 34 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 17.5 Bewertungen. Hast du eine Frage zu Hifonics Elite BZE65CX oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Most modern vehicles have speakers that are

mounted directly to the structure of the door. Access

is achieved by the removal of the door panel. Some

vehicles may only require the removal of a small

panel around the speaker itself.

Most rear speakers are

accessed from within the

trunk. Some may require the

removal of the rear package

tray. Hatchbacks and SUV’s

will usually require the

removal of a side panel.

Once the factory speakers are

removed, check the fi t and

determine if there is enough

depth clearance for the new

speaker. A good way to do this is

to roll the window down and back

up while holding the speaker in

place. If you decide to run wires,

make sure to use factory harness

boots and grommets where ever

possible.

Access and

remove factory

door speakers

Access and

removal of rear

factory speakers

Fit and Wiring

Factory Speaker Removal

Speaker Dimensions

CAUTION

Always consider consulting a professional audio installer

before installing new speakers. Many car manufacturers locate

speakers behind interior panels that require special tools to

remove those panels to access the speakers. Some panels will

be screwed in, some will use plastic fasteners, many will have

both. Be careful and take your time.

If you are using the speaker wire supplied with your new

speakers make sure that you run the speaker wires through

the factory boot. Do not let speaker wire make contact with

metal edges of doors or other access holes.

A

B

C

Congratulations on your choice of a Hifonics speaker. This

“Quick Start Installation” guide is meant to help you “hook

up” and play music. For more detailed information on

system setting, speaker and subwoofer configuration, and

full specifications by model, visit the website at

Hifonics.com

It’s a good idea to confirm that you have purchased the correct

size speakers to fit your vehicle. If you have any reservations

about being able to complete the installation yourself, we

recommend contacting a professional. The removal of interior

panels can be tricky and may require special tools. Be careful

as you go.

A B C D EF

BZE65C 7.2”(182)2.4”(62) 2.7”(68) 3.2”(81)5.6”(142)6.6”(167)

BZE65CX 7.2”(182)2.4”(62) 3.2”(80) 3.2”(81)5.6”(142)6.6”(167)

BZE69CX 7.24”/10.1”

(184/256) 3.0”(77)3.4”(85)3.9”(100) 5.9”/8.7”

(149/220) 6.6”/9.4”

(167/239)

Before you start

Once you are sure the speaker

fi ts and has adequate clearance,

connect the positive and negative

wires to the proper terminals.

Securely screw the speaker into

place. Replace door panel.

Once you are sure the speaker

fi ts and has adequate clearance,

connect the positive and negative

wires to the proper terminals.

Securely screw the speaker into

place. Replace speaker cover

panel.

Some vehicles may not have a

door speaker location. While it is

possible to install the speakers in

this situation, it is more difficult.

Consider using a professional for

custom installations.

Factory location

behind door

panel

Factory location

behind small

panel

Custom location

A

B

C

Coax installation

Mount the speakers in same

way that the factory speaker was

mounted. Attach the positive

and negative wires to the proper

terminals. Make sure any wires

are secured properly.

Rear factory

locations

D

A

CB

D

E

F

Produktspezifikationen