Hikoki NP1835DA Bedienungsanleitung
Hikoki
Broschüren
NP1835DA
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikoki NP1835DA (80 Seiten) in der Kategorie Broschüren. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/80
Model
Modèle
Modelo
NP 1835DA
Cordless Pin Nailer
Micro pinnel sans fil
Clavadora de puntas inalámbrica
INSTRUCTION AND SAFETY MANUAL
DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual to use the tool.
This manual should be stored in safe place.
MANUEL D’INSTRUCTIONS ET DE SÉCURITÉ
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque
d’entraîner la mort ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Cet outil ne doit jamais être utilisé par une personne n’ayant pas pris connaissance
du manuel.
Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES Y MANUAL DE SEGURIDAD
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones
serias o en la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el martillo neumático.
La herramienta no deberá utilizarse sin haber leído previamente este manual.
Este manual debe ser guardado en un lugar seguro.
2024/05/23 12:39:14Stylesheet: NA Version: 2024.3.27
NP1835DA_C99282361_411_NA
English
2
IMPORTANT SAFETY INFORMATION
Read and understand tool labels and all of the operating
instructions, safety precautions and warnings in this
manual before operating or maintaining this nailer.
Failure to follow warnings could result in DEATH or
SERIOUS INJURY.
Most accidents that result from the operation and
maintenance of Nailers are caused by the failure to
observe basic safety rules or precautions. An accident can
often be avoided by recognizing a potentially hazardous
situation before it occurs, and by observing appropriate
safety procedures.
Basic safety precautions are outlined in the “SAFETY”
section of this Manual and in the sections which contain
the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or
machine damage are identified by DANGERS and
WARNINGS on the Nailer and in this Manual.
NEVER use this Nailer for applications other than those
specified in this Manual.
DEFINITIONS OF SIGNAL WORDS
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury, or may cause machine damage.
NOTE emphasizes essential information.
SAFETY
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
2024/05/23 12:39:14Stylesheet: NA Version: 2024.3.27
NP1835DA_C99282361_411_NA
Produktspezifikationen
| Marke: | Hikoki |
| Kategorie: | Broschüren |
| Modell: | NP1835DA |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hikoki NP1835DA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Broschüren Hikoki
4 Juni 2025
4 Juni 2025
4 Juni 2025
9 Mai 2024
20 Dezember 2023
5 Dezember 2023
21 September 2023
14 September 2023
14 August 2023
14 November 2022
Bedienungsanleitung Broschüren
- Broschüren Swingline
- Broschüren Makita
- Broschüren Sencor
- Broschüren Rapid
- Broschüren Aqua Joe
- Broschüren Parkside
- Broschüren President
- Broschüren Silverline
- Broschüren Güde
- Broschüren Globaltronics
- Broschüren Bosch
- Broschüren Hitachi
- Broschüren Einhell
- Broschüren Metabo
- Broschüren POWERNAIL
Neueste Bedienungsanleitung für -Kategorien-
7 Juni 2025
3 Juni 2025
3 Dezember 2024
3 Dezember 2024
3 Dezember 2024
3 Dezember 2024
3 Dezember 2024
3 Dezember 2024
3 Dezember 2024
3 Dezember 2024