Hikvision DS-PM-RSO4-H Bedienungsanleitung


Lies die bedienungsanleitung für Hikvision DS-PM-RSO4-H (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 31 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 16 Bewertungen. Hast du eine Frage zu Hikvision DS-PM-RSO4-H oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
Product Overview
The RS485 Output Expander provides 4 / 8 relays
with Form C (normally open and normally closed)
contacts that are connected to the Security Control
Panel via the control's RS-485 bus wiring. The
device address of the relay module can be set by
DIP switches for RS-485 communicaons.
Physical Interfaces
Order Models
DS- -RS04-H PM
RS485 4 Outputs
Expander
DS- -RS08-H PM
RS485 8 Outputs
Expander
Specicaons
Electrical
Power Consumpon
2W@12VDC
Environmental
Temperature
(Operang)
- to +55 10℃ ℃
Relave Humidity
10% 90% to
Relay Output
Contact Rang
220VAC@ 10A
Insulaon
resistance
1000M @500VDC
Cauon
Power o the control panel and set the DIP switch the expander before installing. es in
Do not set several expanders as a same address, or it may cause communicaon faults.
The available device address ranges from 0 to 31.
Power on the expan before powering on the control panel. der
The designated earth ground terminal must be terminated in a good earth ground.
DS- -R -H PM S04
DS- -R -HPM S08


Produktspezifikationen

Marke: Hikvision
Kategorie: Nicht kategorisiert
Modell: DS-PM-RSO4-H

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hikvision DS-PM-RSO4-H benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten