Hilti KB-TZ SS 316 Bedienungsanleitung

Hilti Nicht kategorisiert KB-TZ SS 316

Lies die bedienungsanleitung für Hilti KB-TZ SS 316 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 9.5 Bewertungen. Hast du eine Frage zu Hilti KB-TZ SS 316 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
2143080 A4-10.2019
3/8"
KB-TZ, KB-TZ SS 304,
KB-TZ SS 316
hnom tfix
tinst
WS
h0dh
hef
dbit
90°
d0 = Ø 38
90°
d0 = Ø 38
tinst
SI-AT-A22 +
SIW-6AT-A22**
Anchor diameter [inch] 3
/8
dbit [inch] 3
/8
Anchor Length [inch] 3 3 3
/4 5
hef [inch] 11/ * 2 121/ * 2 223/4* 11/ * 2 223/4*
min. hnom [inch] 113
/16 25/16 113
/16* 25
/16 31/16 113
/16 25/16 31/16
min. h0*** [inch] 2 2 5/82 25
/831
/42 25/831/4
Tinst [ft-lb] 25 25 25
Tinst (Masonry) [ft-lb] n/a 15 n/a 15 n/a n/a 15 n/a
dh[inch] 7/16 7/16 7/16
WS (Wrench Size) [inch] 9/16 9/16 9/16
max. tx [inch] 13 /16 5/16 19/16 11
/16 5/16 213
/16 25/16 19/16
1a 2
1b
3b
3a
Use only carbide-tipped masonry drill bits complying with ANSI B212.15.1994
* h ef
not approved for masonry. hef not approved for SS304 or SS316
** Adaptive torque (AT) system not applicable for installation in concrete masonry unit or grout lled block
** AT System not applicable for wood fastening applications
*** For a non-hole cleaning installation (step 1a or 1b), make sure to drill deep enough to achieve h 0
, taking into account the depth of debris remaining in the hole


Produktspezifikationen

Marke: Hilti
Kategorie: Nicht kategorisiert
Modell: KB-TZ SS 316

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hilti KB-TZ SS 316 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten