Hitachi CP-EW5001WN Bedienungsanleitung
Hitachi
Videostrahl
CP-EW5001WN
Lies die bedienungsanleitung für Hitachi CP-EW5001WN (22 Seiten) kostenlos online; sie gehört zur Kategorie Videostrahl. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 13 Bewertungen. Hast du eine Frage zu Hitachi CP-EW5001WN oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/22

1
ENGLISH
WARNING ►Before using this product, be sure to read all manuals for this
product. After reading them, store them in a safe place for future reference.
►Heed all the warnings and cautions in the manuals or on the product.
►Follow all the instructions in the manuals or on the product.
First of all ............................................ 2
Entries and graphical symbols explanation ......2
Important safety instruction ..............................2
Regulatory notices .............................. 3
About Electro-Magnetic Interference ................
3
Disposal of Old Equipment and Batteries
Only for European Union and countries with
recycling systems
...............................................4
Contents of package........................... 4
Preparing for the remote control ......... 5
Arrangement ....................................... 6
Connecting with your devices ............. 7
Fastening the adapter cover ............... 8
Connecting power supply ................... 9
Fastening the cable ............................ 9
Turning on the power ........................ 10
Adjusting the projector's elevator ..... 11
Displaying the picture ....................... 12
Turning off the power ........................ 13
Replacing the lamp ........................... 14
Cleaning and replacing the air lter
.. 16
Replacing the internal clock battery.. 18
Using the CD manual ....................... 19
Specications ................................... 20
Troubleshooting
- Warranty and after-service ........... 21
Contents
NOTE • In this manual, unless any comments are accompanied, “the
manuals” means all the documents provided with this product, and “the product”
means this projector and all the accessories came with the projector.
LCD Projector
CP-EX5001WN/CP-EW5001WN/CP-EU4501WN
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely
and utilize well the product.
Provision

2
First of all
Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and the
product as follows, for safety purpose. Please know their meanings beforehand,
and heed them.
Important safety instruction
The followings are important instructions for safely using the product. Be sure to
follow them always when handling the product. The manufacturer assumes no
responsibility for any damage caused by mishandling that is beyond normal usage
dened in these manuals of this projector.
WARNING
This entry warns of a risk of serious personal injury or even death.
CAUTION This entry warns of a risk of personal injury or physical damage.
NOTICE This entry notices of fear of causing trouble.
WARNING ►Never use the product in or after an abnormality (ex. giving
off smoke, smelling strange, took a liquid or an object inside, broken, etc.) If an
abnormality should occur, unplug the projector urgently.
►Situate the product away from children and pets.
►Keep small parts away from children and pets. If swallowed, consult a
physician immediately for emergency treatment.
►Do not use the product when there is fear of a thunderbolt.
►Unplug the projector from the power outlet if the projector is not used for the
time being.
►Do not open or remove any portion of the product, unless the manuals direct
it. For internal maintenance, leave it to your dealer or their service personnel.
►Use only the accessories specied or recommended by the manufacturer.
►Do not modify the projector or accessories.
►Do not let any things or any liquids enter to the inside of the product.
►Do not wet the product.
►Do not place the projector where any oils, such as cooking or machine oil,
are used. Oil may harm the product, resulting in malfunction, or falling from the
mounted position. Do not use adhesive such as threadlocker, lubricant and so
on.
►Do not apply a shock or pressure to this product.
- Do not place the product on an unstable place such as the uneven surface or
the leaned table.
- Do not place the product unstably. Place the projector so that it does not
protrude from the surface where the projector is placed on.
- Remove all the attachments including the power cord and cables, from the
projector when carrying the projector.
►
Do not look into the lens and the openings on the projector, while the lamp is on,
since the projection ray may cause a trouble on your eyes.
►
Do not approach the lamp cover and the exhaust vents, while the projection lamp
is on. Also after the lamp goes out, do not approach them for a while, since too hot.
Provision

3
ENGLISH
Regulatory notices
About Electro-Magnetic Interference
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
This product may cause interference if used in residential areas. Such use must
be avoided unless the user takes special measures to reduce electromagnetic
emissions to prevent interference to the reception of radio and television
broadcasts.
In Canada
CAN ICES-3(A) / NMB-3(A).
In the US and places where the FCC regulations are applicable
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to case harmful interference in which case the user will be required to
correct the interference at his own expense.
INSTRUCTIONS TO USERS: Some cables have to be used with the core set.
Use the accessory cable or a designated type cable for the connection. For cables
that have a core only at one end, connect the core to the projector.
CAUTION: Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
As with any bright source, do not
stare into the direct beam, RG2
IEC 62471-5:2015.
Provision
Produktspezifikationen
Marke: | Hitachi |
Kategorie: | Videostrahl |
Modell: | CP-EW5001WN |
Eingebaute Lautsprecher: | Nein |
WLAN: | Ja |
Breite: | 413 mm |
Tiefe: | 315 mm |
Gewicht: | 5200 g |
Mitgelieferte Kabel: | USB |
Produkttyp: | Standard Throw-Projektor |
Produktfarbe: | Weiß |
Höhe: | 123 mm |
Energiequelle: | AC |
Platzierung: | Desktop |
AC Eingangsspannung: | 100 - 120 V |
AC Eingangsfrequenz: | 50 - 60 Hz |
Eingebautes Display: | Nein |
Anzahl USB 2.0 Anschlüsse: | 3 |
Fernbedienung enthalten: | Nein |
Stromverbrauch (Standardbetrieb): | 390 W |
Anzahl Ethernet-LAN-Anschlüsse (RJ-45): | 1 |
Kontrastverhältnis: | 16000:1 |
Anzahl HDMI-Anschlüsse: | 1 |
Stromverbrauch (Standby): | 0.35 W |
Geräuschpegel: | 35 dB |
Audioeingang (L, R): | 3 |
Audio (L,R) Out: | 1 |
3D: | Nein |
DVI Anschluss: | Nein |
Full-HD: | Nein |
Zoom-Fähigkeit: | Ja |
Integrierter Kartenleser: | Nein |
Projektorhelligkeit: | 5000 ANSI Lumen |
Projektionstechnologie: | LCD |
native Auflösung des Projektors: | WXGA (1280x720) |
Projektionsflächenkapazität: | 30 - 300 " |
Projektionsabstand: | - m |
Fokus: | Manuell |
Anzahl VGA (D-Sub) Anschlüsse: | 1 |
Lebensdauer der Lichtquelle: | 4500 h |
Brennweitenbereich: | - mm |
Lebensdauer der Lichtquelle (ökonomischer Modus): | 6000 h |
Geräuschpegel (Energiesparmodus): | 27 dB |
Zoomtyp: | Manuell |
Horizontal Linsenschwankung Range: | 10.1 - 6.3 ° |
Ethernet/LAN: | Ja |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hitachi CP-EW5001WN benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Videostrahl Hitachi
24 Mai 2024
19 Mai 2024
19 Mai 2024
17 Mai 2024
16 Mai 2024
15 Mai 2024
11 Mai 2024
7 Mai 2024
2 Mai 2024
21 April 2024
Bedienungsanleitung Videostrahl
- Acer
- Salora
- LG
- AAXA Technologies
- InFocus
- Adj
- D-Link
- Marantz
- Technaxx
- EKO
- Da-Lite
- Stairville
- Celly
- Canon
- Nebula
Neueste Bedienungsanleitung für -Kategorien-
13 August 2024
9 August 2024
9 August 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024