H.Koenig V85 Bedienungsanleitung
Lies die bedienungsanleitung für H.Koenig V85 (79 Seiten) kostenlos online; sie gehört zur Kategorie Eisen. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 12 Bewertungen. Hast du eine Frage zu H.Koenig V85 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/79
Centrale vapeur
Dampfbügelstation
Stoomstation
Central vapor
Centrale vapore
Steam station iron
v85
ENGLISH
IMPORTANT SAFEGARDS
1.
Make sure to read all the safety precautions below and
look at the illustrations before you start using the
appliance.
2.
Use the appliance for its intended use only described
in this manual.
3.
The appliance is intended for household use only.
4.
In order to protect against the risk of electric short, do
not immerse iron power base into water or any other
liquids.
5.
Connect the appliance only to an alternating current of
the voltage specied on the rating plate and only to an
earthed socket. To avoid a circuit overload, do not operate
another high wattage appliance the same circuit. in
6.
Turn the appliance to OFF before plugging or
unplugging from outlet. Never yank cord to disconnect
from outlet; instead, grasp plug and pull disconnect. to
7.
Do not allow power cord or supply hose to touch hot
surface.
8.
Unplug the appliance from main socket before lling or
empty or when not use. in
9.
Do not operate the appliance with a damaged cord or if
the appliance has been dropped or damaged. To avoid a
hazard such as the risk of electric shock, do not
disassemble the appliance, it must be taken to a qualied
serviceman or manufacturer or its service agent for
examination and repair. Incorrect re-assembly can cause a
risk of electric shock when the iron is used.
10.
Place the iron out of reach of children; close
supervision is necessary for any appliance being used by
or near children. Do not leave the iron unattended while
connected to the supply mains.
11.
During use, always place its stand on a stable, level
and horizontal surface ironing board. or
12.
Always place the iron on its stand, and do not allow the
hot soleplate touch power cord supply hose. or
13.
Burns can occur from touching hot metal parts, hot
water steam. or Use caution when using the appliance.
14.
Never use the iron facing towards people because the
steam can cause burns.
15.
The surfaces are liable get to hot during use.
16.
Never twist the supply hose during use.
17.
The appliance must be used and rested on a stable,
level and horizontal surface.
18 . The iron shall placed the separate stand only. be on
19.
When placing the iron on its stand, ensure that the
surface which the stand placed on is is stable.
20.
The iron is not to be used if it has been dropped, if
there are visible signs of or damage leaking. if it is
21.
The iron must not be left unattended while it is
connected the supply mains. to
22.
The appliance must be rest or stocked on a stable,
level and horizontal surface.
23.
During use, if no water in the reservoir, it will produce
noise<70dBA.
24.
This appliance can’t be used by persons with
reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved, children shall not play with the appliance.
cleaning and user maintenance shall not be by made
children without supervision.
Produktspezifikationen
| Marke: | H.Koenig |
| Kategorie: | Eisen |
| Modell: | V85 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit H.Koenig V85 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Eisen H.Koenig
5 August 2024
4 August 2024
4 August 2024
20 Juli 2024
14 Juli 2024
13 Juli 2024
Bedienungsanleitung Eisen
- Malmbergs
- Tomado
- Camry
- Beem
- Morphy Richards
- Unold
- Rotel
- Defy
- Lümme
- Calor
- LERAN
- Frigidaire
- CHI
- Tower
- Shark
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
14 Oktober 2024
13 Oktober 2024
13 Oktober 2024
12 Oktober 2024
12 Oktober 2024