HMD Fusion X1 Bedienungsanleitung

Lies die bedienungsanleitung für HMD Fusion X1 (72 Seiten) kostenlos online; sie gehört zur Kategorie Smartphone. Dieses Handbuch wurde von 39 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 5 Bewertungen. Hast du eine Frage zu HMD Fusion X1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

EN

1 Headset connector, 2 Microphone, 3 Loudspeaker, 4 Smart pins,

5Camera, 6 Flash, 7 Rear cover screws, 8 SIM and memory card slot,

9 Camera, 10 Earpiece, 11 Microphone, 12 Volume keys,

13Power/Lock key, Fingerprint sensor, 14 USB connector,

15Maximum transmit power table.

To switch your phone on, press and hold the power key until the

phone vibrates. The phone guides you through the setup.

If the battery is completely discharged when you start charging

thephone, it may take several minutes before the charging

indicator is displayed.

If you have an eSIM card instead of a physical SIM card, switch

onyour phone and follow the instructions on the phone. To be able

to activate your eSIM, you need a Wi-Fi connection.

Note that if you have a single-SIM phone, you can only have one

SIMcard, physical or eSIM, active at a time. If you have a dual-SIM

phone, you can have two physical SIM cards or a physical SIM and an

eSIM active at a time. For information on eSIM cards, contact your

network operator.

For a generic user guide, safety instructions, and warranty

information, open the My Device app on your phone, even when

you're offline: tap My Device > Support > User guide.

For a product-specific online user guide, safety instructions,

warranty information, and troubleshooting help, or finding the

nearest authorized service facility, go to https://www.hmd.com/

support.

Product and safety info

Important: For important info on the safe use of your device and

battery, read the Product and safety info before you take your

device into use.

Your device has an internal, non-removable, rechargeable lithium-

ion polymer battery. Do not attempt to remove the battery or back

cover, as you may damage the device. To replace the battery, take

the device to the nearest authorised service facility.

Use your device only with an original HBA5033AA rechargeable

battery.

Charging time may vary depending on device capability.

Charge your device with the HHAD-033N charger. Charger plug

type may vary. HMD Global may make additional battery or charger

models available for this device.

For environmental reasons this package does not include a charger.

This device can be powered with most USB power adapters and a

cable with USB Type-C plug. Use only chargers and cables that are

compliant with applicable country regulations and international

Produktspezifikationen