Hollywood Racks SR1 Bedienungsanleitung

Lies die bedienungsanleitung für Hollywood Racks SR1 (5 Seiten) kostenlos online; sie gehört zur Kategorie Fahrradträger. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu Hollywood Racks SR1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Installation Instructions

for Hollywood SR1 Spare Tire

Bicycle Carriers

When using the Hollywood SR1 Spare Tire rack, always remember the following points:

•Max Capacity: 35 lbs per Bike. Two Bikes.

•Keep bicycle tires at least 1 ft (30cm) away from exhaust pipe

•Tighten all straps before and after mounting bikes

•Check the rack, bicycles and strap tightness/condition regularly during use

•Drive slowly when used on bumpy or dirt roads

•NOT TO BE USED ON ANY TRAILER, FIFTH WHEEL OR TOWED VEHICLE

Caution: Be sure that the spare tire is properly mounted to the vehicle and that the mounting

bracket/apparatus is suitable and strong enough to support the entire weight of the spare tire, bike rack

and bicycle(s). Contact the vehicle manufacturer if there are any questions regarding the strength of the

tire mounting apparatus.

Tools Needed: 9/16” socket wrench or and adjustable wrench

The Hollywood Spare Tire Rack comes fully assembles from the factory, and set up for “center mounted”

spare tires. If your spare tire is side mounted, see assembly step 7. The rack easily attaches to the spare

tire using an adjustable rear brace in conjunction with three nylon attachment straps.

Support Arm

Bike Cradle

Rear Brace

Side Strap

Adjustment

Bolt

Support

Bar

Rear Straps

(not shown)

Fig.1

The “side” attachment strap goes around

the tire and prevents rotational movement.

The two “rear” straps pass behind the tire

and keeps the rack tight and secure

against the front of the spare tire.

1

Side Buckle

(not shown)

Main Frame

Rear Buckles

Produktspezifikationen