Honeywell 5103 Bedienungsanleitung
Lies die bedienungsanleitung für Honeywell 5103 (8 Seiten) kostenlos online; sie gehört zur Kategorie Sicher. Dieses Handbuch wurde von 45 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 23 Bewertungen. Hast du eine Frage zu Honeywell 5103 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
Model 5101, 5102 5103SL, 5110,, 5111, 5115
STEEL SECURITY SAFE
Read this manual carefully and never store it inside the safe!
!
1
Models 5101, 5102, 5103SL, 5110, 5111, 5115
Steel Security Safe
PACKAGE CONTENTS
1 – Steel Security Safe
1 – Operation Manual
2 – Override Access Keys
4 – “AA” Batteries
1 – Mounting Kit w/ Bolts (Except 5103SL)
1 – Removable Shelf (Models 5103SL, 5110, & 5111 only)
ATTENTION
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your safe, please contact our Consumer
Assistance Department by telephone.
Store will not accept returned products without prior authorization. You must first
contact our consumer assistance department.
US/Canada 1- - - 877 354 5457 (Toll Free)
Mexico 01- - - 800 288 2872 After English voice recording stops you must then enter
800 860 1677 to complete your call. (Toll Free)- -
Australia 0011 800 5325 7000 - - - (Toll Free)
Germany/New Zealand 00 800 5325 7000 - - - (Toll Free)
Other Countries XX*- - - 310 323 5722
- XX* Dial U.S. Country Code first (Toll Charges Apply)
LOCK OVERVIEW
LED Indicator Lights
Digital Keypad
Open/Close Knob
Access Key Cover
IMPORTANT INSTALLING!!– TEST DIGITAL LOCK BEFORE
!
2
IMPORTANT!
Remove plastic corner protectors (A) from
the outside of safe door before operating.
SETUP
STEP 1. OPEN SAFE WITH OVERRIDE KEY
1. Remove override key cover with small
screwdriver.
2. unlock safe. Insert override key and turn left to
3. Turn knob to right and open safe door.
STEP 2. INSTALL BATTERIES
1. Remove battery compartment (A) cover on
inside door. Insert 4 “AA” batteries (included).
Ensure the batteries are installed in the correct
direction, with regard to polarity (+ and - )
See diagram.
2. Replace the battery cover.
3. Do not close door before testing digital lock.
STEP 3. TEST DIGITAL LOCK
1. With door open, turn knob left to put locking door bolts (B) in lock position.
2. Remove override key and store in a secure place.
NEVER STORE KEYS INSIDE SAFE!
3. Enter the preset pass code: “1”- – - . “5” “9” “B”
4. Turn knob to right within 5 seconds.
5. Lock bolts should recede into the unlocked position.
STEP 4. PROGRAM A NEW PASSCODE
1. With door open, press reset button (C)
inside door.
2. Yellow light is on, enter new pass code
in 30 seconds.
3. Enter new code (3 to 8 digits) followed
by “A” or “B”.
4. Safe will beep and yellow light will turn off.
NOTE: The factory pre-set code will not work after a new pass code is programmed.
OPERATION
TO OPEN THE SAFE
1. To unlock and open safe, enter the pass code followed by
“A” or “B”.
2. Turn door entry knob to the right and open door.
TO CLOSE THE SAFE
1. Close the door and hold it in the closed position.
2. Turn door entry knob to left to engage the lock bolts and lock safe.
Produktspezifikationen
| Marke: | Honeywell |
| Kategorie: | Sicher |
| Modell: | 5103 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Honeywell 5103 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Sicher Honeywell
4 Juni 2024
16 Mai 2024
17 April 2024
1 April 2024
30 März 2024
26 Februar 2024
11 Februar 2024
21 Januar 2024
8 Januar 2024
20 Dezember 2023
Bedienungsanleitung Sicher
- First Alert
- Perel
- SereneLife
- SentrySafe
- Handson
- Burg Wächter
- Salvus
- Suncast
- First Austria
- Conrad
- Master Lock
- Westfalia
- Royal Sovereign
- VARO
- Philips
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
4 Juni 2025