Honeywell QuietSet 5 HYF260 Bedienungsanleitung
Honeywell
Ventilator
QuietSet 5 HYF260
Lies die bedienungsanleitung für Honeywell QuietSet 5 HYF260 (14 Seiten) kostenlos online; sie gehört zur Kategorie Ventilator. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Honeywell QuietSet 5 HYF260 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/14
1
IMPORTANT
SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING
THIS FAN
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
FOR US MODELS ONLY – This product
employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the
product from the outlet. Replace the fuse
as per the user servicing instructions (follow
product marking for proper fuse rating)
and check the product. If the replacement
fuse blows, a short-circuit may be present
and the product should be discarded or
returned to an authorized service facility for
examination and/or repair.
1. Use this fan only as described in this
manual. Other use not recommended as
it may cause fire, electric shock or injury
to persons.
2. This product is intended for household
use ONLY and not for commercial,
industrial or outdoor use.
3. To protect against electric shock, do not
place fan in window, immerse unit, plug
or cord in water or spray with liquids.
4. This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of shock, this plug is intended to
fit only one way in a polarized outlet. If the
plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. DO NOT attempt to
defeat this safety feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan OFF and unplug the fan from
the outlet when not in use, when moving
the fan from one location to another and
before cleaning.
7. To disconnect the fan, first turn the unit
OFF, grip the plug and pull it from the wall
outlet. Never pull the plug by the cord.
8. Do not use an extension cord with this fan.
9. Do not operate the fan in the presence of
explosive and/or flammable fumes.
10. Do not place the fan or any parts near
an open flame, cooking or other heating
appliance.
11. Do not operate the fan with a
damaged cord or plug or if the product
malfunctions, is dropped or damaged
in any manner (see warranty).
12. Avoid contact with moving fan parts.
13. The use of attachments not
recommended by the manufacturer
may be hazardous.
14. Place the fan on a dry level surface.
15. Do not hang or mount fan on a wall
or ceiling.
16. Do not operate if the fan housing is
damaged.
QUIETSET
®
WHOLE ROOM TOWER FAN
HYF260W Series
HYF260B Series
HYF290B Series
Owner’s Manual
Honeywell is a trademark of Honeywell International Inc., used under license by Helen of Troy Limited.
Honeywell International Inc. makes no representation or warranties with respect to this product.
QuietSet is a registered trademark owned by Helen of Troy Limited.
2 3
A. BASE ASSEMBLY
• Remove 2 thumb screws from the base and set aside. Align the front and
back base pieces and gently push until pieces snap securely together
(Fig. 3).
B. SECURING THE TOWER FAN TO THE BASE
• At the base of the housing, remove the locking nut and set aside.
• Carefully lift the fan housing (Fig. 4) and place the power cord through
the center of the base.
• Lower the fan housing into the base (Fig. 4), align the back of
the fan with the back of the base. Gently rotate the fan housing
until it is seated in the base. (Fig. 5).
• Take the locking nut and place power cord through the locking nut
(Fig 4) bringing locking nut up inside the base, (Fig. 5) screw the locking
nut onto the fan housing turning clockwise until fully tightened and an
audible ratcheting is heard.
D. SECURING THE CORD INSIDE THE BASE
• Gently place the fan on its side, pressing the cord securely into cord
guides (Fig. 6) along the inside of fan base, exiting through the notched
opening (Fig. 6) ensuring a flat and stable base for the fan.
• Place 2 thumb screws into the the base for added stability (Fig. 7).
• Return the tower fan to its upright position.
Note: Do not operate the tower fan unless it is in its proper,
upright position.
ASSEMBLY INSTRUCTIONS
Fig. 3
Fig. 5
Fig. 6
Fig. 4
17. A loose fit between the AC outlet
(receptacle) and plug may cause
overheating and a distortion of the plug.
Contact a qualified electrician to replace
loose or worn outlet.
18. Do not operate any fan with a damaged
cord or plug. Discard any damaged fan,
return the fan to the retailer where the
fan was purchased, or request a return
authorization to return to Kaz USA, Inc. for
examination and/or repair.
19. Do not run fan cord under carpeting. Do
not cover cord with throw rugs, runners,
or similar coverings. Do not route cord
under furniture or appliances. Arrange
cord away from traffic areas and where it
will not be tripped over.
WARNING: To Reduce The Risk of Fire or
Electric Shock, Do Not Use This Fan With
Any Solid-State Speed Control Device,
other than the one supplied.
This fan features a fused safety plug which is designed to cut off electric current to the fan if an
electrical fault occurs. Please see below for more information on how to properly use your fan and
replace the safety plug fuse, if needed.
FUSED SAFETY PLUG - FOR US ONLY
USER SERVICING INSTRUCTIONS
• If your fan loses power and you suspect that the fuse on your fan
has blown, grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
• Slide fuse cover, located on the top of the plug, towards the
prongs of the plug. (Fig. 1)
• Carefully remove the blown fuse and snap a new fuse into place.
To Reduce the Risk of Fire, replace fuse only with 2.5 Amp,
125 volt fuse. Fully close the fuse door by sliding back into
place. (Fig. 2) Discard the blown fuse. The plug should now
be ready for normal use.
• To Reduce the Risk of Fire, do not replace attached plug.
Contains a safety device (fuse) that should not be removed.
Discard product if the attached plug is damaged.
• If you need further information on how or when to replace
the fuse in the safety plug, please contact Kaz Consumer
Relations Department by visiting our website at
www.honeywellpluggedin.com/fans or calling
1-800-477-0457.
Fig. 1
Fig. 2
Fig. 7
Produktspezifikationen
| Marke: | Honeywell |
| Kategorie: | Ventilator |
| Modell: | QuietSet 5 HYF260 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Honeywell QuietSet 5 HYF260 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Ventilator Honeywell
23 Juli 2025
26 Juni 2025
12 Juni 2025
9 Oktober 2024
2 Oktober 2024
4 September 2024
2 September 2024
30 August 2024
28 August 2024
Bedienungsanleitung Ventilator
- GoldAir
- Beper
- Bomann
- OK
- Cli-mate
- PureGuardian
- Midea
- Primo
- Sportstech
- Kincrome
- HQ
- Jata
- Aspes
- ThreeSixty
- Hema
Neueste Bedienungsanleitung für -Kategorien-
25 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
24 Juli 2025
24 Juli 2025
24 Juli 2025
24 Juli 2025
24 Juli 2025