Honeywell RLV310 Bedienungsanleitung

Lies die bedienungsanleitung für Honeywell RLV310 (2 Seiten) kostenlos online; sie gehört zur Kategorie Thermostat. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 4 Bewertungen. Hast du eine Frage zu Honeywell RLV310 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

RLV310 69-1854 6/27/05 1/2

This thermostat can be used to control a electric heating system such

as an baseboard heater, a radiant ceiling, a radiant floor, a convector,

etc. See minimum and maximum load requirement in section 5.

The thermostat cannot be used with the following:

•a resistive load under 2 A

•systems driven by a contactor or a relay (inductive load)

•fan-equipped heating systems

•central heating systems

SUPPLIED PARTS

•One (1) thermostat

•Two (2) 6-32 mounting screws

•Two (2) solderless connectors

TURN OFF POWER OF THE HEATING SYSTEM AT THE MAIN

POWER PANEL TO AVOID ELECTRIC SHOCK.

Loosen the screw holding the control module to the base. The screw

cannot be completely removed. Lift the control module to remove it

from the base.

Make the appropriate connections. Please note that the thermostat

wires are non-polarized; either wire can be connected to either termi-

nal.

NOTE: All cables and connections must conform to the local electri-

cal code. Special CO/ALR solderless connectors must be used when

connecting with aluminium conductors.

Align and affix the base to the

electrical box.

Set the switch at the back of the remov-

able part of the thermostat to °C or °F.

Replace the front part of the thermostat

on the base and secure it in place with

the screw.

Keep air vents of thermostat clean and

free from obstructions.

n

n

n

nn 1.

o

o

o

oo 2.

Temperature

display

Heating power

indicator

Temperature

adjustment

buttons

2-wire installation

4-wire installation

Produktspezifikationen