Hooker 5751-75206-95 Bedienungsanleitung
Lies die bedienungsanleitung für Hooker 5751-75206-95 (3 Seiten) kostenlos online; sie gehört zur Kategorie Tisch . Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu Hooker 5751-75206-95 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
1/3
ASSEMBLY INSTRUCTION
Item# 1-75206-575 95 Friendship Table
** Please make sure you have all parts indicated below prior to assembly.
This table is heavy and can best be assembled with the help of two or more people.
Diagram 1 Diagram 2 Diagram 3
Note:
1. Leaves cannot be switchable. Follow numbers on leaves and top when assemble
2. Height of this table can be adjusted with or without extension block. (30” and 36” heights)
Assembly steps with extension blocks:
1. Attach extension blocks (H) posts (I),then attach mounting plate (J) to posts with extension to
blocks (H)by using bolts (E), lock washers (C) and flat washers (D), tighten all with allen
wrench (A). (See Diagram 1)
2/3
2. posts (I)Attach stretcher (K) to with bolts (F), lock washers (C) and flat washers (D),
sure all by allen wrench (See Diagram 2)(A)
3. Place table top (L) upside down on a soft surface to prevent it from being scratched.
Put whole base onto top to make sure all pre-drilled holes are in alignment, well insert
bolts (G), lock washers (C) and flat washers (D), tighten bolts by turning with allen
wrench (A) in clockwise direction. (See Diagram 3)
4. Turn table upright.
Assembly steps without extension blocks:
Diagram 4 Diagram 5 Diagram 6
1. Unscrew bolts (E), lock washers (C) and flat washers (D) from mounting bridge (J Then ).
remove the extension blocks (H) from the posts (I) directly, (See Diagram 4)
2. mounting plate (J) to posts using bolts (B), lock washers (C) and flat Attach by
washers (D), tighten all with allen wrench (A). (See Diagram 5)
3. Place table top (L) upside down on a soft surface to prevent it from being scratched.
Put whole base onto top to make sure all p -drilled holes are in alignment, well insert re
bolts (G), lock washers (C) and flat washers (D), tighten bolts by turning with allen
wrench (A) in clockwise direction. (See Diagram 6)
4. Turn table upright.
Instruction for table leaves:
1. There are latches at the bottom of table top, turn o the latches as shown in Diagram 7. ff
2. Pull out table top as the arrow direction shown in Diagram 8.
3. Place table leaves between and push table tops together.
4. Turn on latches. (see Diagram 7)
3/3
5. Take opposite actions to remove table leaves.
Diagram 7 Diagram 8
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
Produktspezifikationen
| Marke: | Hooker |
| Kategorie: | Tisch |
| Modell: | 5751-75206-95 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hooker 5751-75206-95 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Tisch Hooker
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
Bedienungsanleitung Tisch
- Mount-It!
- Klarfit
- Cool Head
- Florabest
- Vtech
- Paidi
- Crelando
- Bbf
- Melinera
- MooreCo
- Special-T
- Skip Hop
- Livarno
- Boori
- Gator
Neueste Bedienungsanleitung für -Kategorien-
18 Juni 2025
8 Juni 2025
7 Juni 2025
1 Dezember 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024