Hooker 638-50012 Bedienungsanleitung


Lies die bedienungsanleitung für Hooker 638-50012 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 9.5 Bewertungen. Hast du eine Frage zu Hooker 638-50012 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
ASSEMBLY INSTRUCTION
Item#: 638-50012 Glamour Floor Mirror
*** Caution: Please read all instructions carefully before starting the assembly process.
This item is heavy and be best to carry on the following steps with the help of two or more people.
Assembly Steps:
1. Screw 3 “L” shape metal brackets(D) onto the top of the mirror using a Phillips Head screwdriver,
2 screws(B), 2 flat washers(C). You can adjust the distance between the mirror to the wall by
relocating “L” shape metal bracket (D) as you need.
2. Mark the location of the screw holes of the “L” shape brackets(D) on the wall, drill 3 holes on
the wall where you marked using 1/4” drill bit.
3. Insert 3 plastic anchors(E) into the holes.
4. Place the mirror to the wall, align the holes on the “L” shape bracket(D) to plastic anchors(E),
screw the “L” Shape brackets to the anchors(E), using a Phillips Head screwdriver.
5. Tighten all screws on the top of the mirror after attaching “L” shape bracket to the wall.
All hardware mentioned above is packed in a small box. Please make sure not to throw it away.
Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a
damp cloth. Polish the finish with soft cloth and an industry recognized furniture polish.


Produktspezifikationen

Marke: Hooker
Kategorie: Nicht kategorisiert
Modell: 638-50012

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hooker 638-50012 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten