Hotone Darkflux Bedienungsanleitung
Hotone
Nicht kategorisiert
Darkflux
Lies die bedienungsanleitung für Hotone Darkflux (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Hotone Darkflux oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
A Portable Power Bank
Designed for Musicians
Use the power adapter to charge the unit.
When charging, the display will
correspond with the power intake:
Charging
Power Output
Specifications
Battery type: Li-polymer battery
Input: (USB-C) 5V 2A 9V 2A
12V 1.5A
Dimensions: 140*75*14.1mm
Rated capacity: 6800mAh (5V/2A)
Connect a 5.5 x 2.1mm male-to-male DC cable or USB cable to your device
to power out. When powering, the display will correspond with the power
output:
Caution:
Keep this unit away from fire. Use and store in a dry environment, free of
water and moisture, which may cause a short circuit. The 9V interface is
an output interface and cannot be used for charging.
Power Level
LED 1
LED 2
LED 3 LED 4
Undervoltage
Off
0 25- %
25-50%
50-75%
75-100%
On
Model: XA-00009
Capacity: 37Wh 3.7V 10000mAh
Output: (USB-A) 5V 2A
(5.5-2.1) 9V 2A
Operating temperature: 5 C-35 C° °
Charging time: approx. 4 hrs (data cable included, 18W adapter)
*Rated energy less than 74Wh/3.7V, in line with international aviation standards.
Take it anywhere.
Blinking
1. When the output current is less than 100mA, the unit shuts down automatically to ensure safety and
power conservation.
2. Connect the output port to automatically start powering. Individual devices will only power when the
power button is turned on.
3. The USB 5V and 9V output ports support simultaneous powering when not charging.
LED 4 LED 2
LED 3
LED 1
Powel
Level
0 25- %
25-50%
50-75%
75 96- %
LED 1
LED 2
LED 3 LED 4
Blinking
Off
On
Fully
charged
0 25- %
25-50%
50-75%
75 96- %
LED 1
LED 2
LED 3 LED 4
Normal charging Fast charging
1. The 5V output can be used normally when charging The 9V output stops when charging . .
Turning ON OFF /
Turning on: Press the ON/OFF button to turn the unit on. The power
indicator light will come on.
Turning off: Press and hold the ON/OFF button for three seconds. The
power indicator light will go off.
User’s Manual
Thank you for purchasing a Hotone product
Please read this manual carefully to get the most out of your Darkflux
Product Overview
USBType-C 9V 2A Center Negative
DC Output, 5.5 x 2.1mm
USBType-A5V2A
Power ON/OFF
*The total current of the effects pedal group must be greater than 100mA, otherwise the unit
will automatically shut down to ensure safety and conserve power.
Powel
Level
Fully
charged
Blinking
Off Off
OffOff
Off
Blinking
Blinking
On On
OnOn On
OnOn On On OnOn On On
Blinking
Off Off Off
Off Off
Off
Blinking Blinking
Blinking Blinking Blinking
Blinking Blinking Blinking Blinking
Off Off
Off Off Off
Off Off
Off
On
On
On
On
On
On
On
On
On
Produktspezifikationen
| Marke: | Hotone |
| Kategorie: | Nicht kategorisiert |
| Modell: | Darkflux |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hotone Darkflux benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Hotone
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- Korg
- Conair
- Lindam
- Scancool
- Hudson Valley
- TS Electronic
- Ewent
- ALM
- Rusta
- TK Audio
- Dantherm
- Trevi
- Hughes & Kettner
- Command
- Mobicool
Neueste Bedienungsanleitung für -Kategorien-
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025