Hotone Loudster Bedienungsanleitung


Lies die bedienungsanleitung für Hotone Loudster (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Hotone Loudster oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Power Requirement: 18-20V DC center positive
Current Consumption: Min. 4.5A
Input Impedance: 500kΩ
Speaker Output: 4-16 , self-adaptiveΩ
Max. Output Power (19V):
75 Watts @ 4 / 40 Watts @ 8 / 20 Watts @ 16Ω Ω Ω
Dimensions: 190mm(D) x 118.5mm(W) x 53.5mm (H)
Weight: 590g
IMPORTANT: TURN ON FIRST, TURN OFF LAST.
Always turn down the volume knob on your power amp before plugging or unplugging
power jacks, cables, etc.
The power amp is protected against the following malfunctions: short-circuit, overheating,
over-voltage, under-voltage and DC issues. ALL OUTPUTS WILL BE MUTED in case the
above malfunctions occur. If this happens, please check the power supply and all cable
connections, then restart the unit and resume normal operation.
The contents of this manual are subject to change without notice.
Controls the output volume
1
2
Power amp input jack, for connecting pedals/preamps
3
18-20V DC adapter plug (center positive)
4
5
Cabinet connector jack (4-16 Ω)
6
Unit on/off switch


Produktspezifikationen

Marke: Hotone
Kategorie: Nicht kategorisiert
Modell: Loudster

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hotone Loudster benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten