Hotpoint FA2 841 JH BL HA Bedienungsanleitung

Lies die bedienungsanleitung für Hotpoint FA2 841 JH BL HA (20 Seiten) kostenlos online; sie gehört zur Kategorie Ofen. Dieses Handbuch wurde von 15 Personen als hilfreich bewertet und erhielt im Schnitt 3.8 Sterne aus 8 Bewertungen. Hast du eine Frage zu Hotpoint FA2 841 JH BL HA oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

EN

Quick guide

CONTROL PANEL DESCRIPTION

1.SELECTION KNOB

For switching the oven on by selecting

a function.

Turn to the position to switch the

oven off.

2.LIGHT

With the oven switched on, press to

turn the oven compartment lamp on or

off.

3.SETTING THE TIME

For accessing the cooking time settings,

delayed start and timer. For displaying

the time when the oven is off.

4.DISPLAY

5.ADJUSTMENT BUTTONS

For changing the cooking time settings.

6.THERMOSTAT KNOB

Turn to select the temperature you

require when activating manual

functions.

For automatic functions use

.

Please note: All knobs are push-activated

knobs. Push down on the centre of the

knob to release it from its seating.

13245

6

SLIDING RUNNERS AND SHELF GUIDES

Before using the oven remove the protective tape [a] and

then remove the protective foil [b] from the sliding runners.

REMOVING THE SLIDING RUNNERS [c]

Pull the lower part of the sliding runner to uncouple the

lower hooks (1) and pull the the sliding runners upwards,

removing them from the upper hooks (2).

REFITTING THE SLIDING RUNNERS [d]

Hook the upper hooks on the shelf guides (1) then press the

lower part of the sliding runners against the shelf guides, until

the lower hooks are clicking (2).

1

2

1

2

[c][d]

REMOVING AND REFITTING THE SHELF GUIDES

1.To remove the shelf guides, firmly grip the external part of

the guide, and pull it towards you to extract the support and

the two internal pins from the lodging.

2.To reposition the shelf guides, position them near the

cavity and initially insert the two pins into their lodgings.

Next, position the external part near its lodging, insert the

support, and firmly press towards the wall of the cavity to

make sure the shelf guide is properly secured.

FIRST TIME USE

1.SETTING THE TIME

You will need to set the time when you switch on the

appliance for the first time: press until the icon and

the two digits for the hour start flashing on the display.

Use or to set the hour and press to confirm. The two

digits for the minutes will start flashing. Use or to set

the minutes and press to confirm.

Please note: When the

icon is flashing, for example following

lengthy power outages, you will need to reset the time.

2.HEAT THE OVEN

A new oven may release odours that have been left behind

during manufacturing: this is completely normal.

Before starting to cook food, we therefore recommend

heating the oven with it empty in order to remove any

possible odours.

Remove any protective cardboard or transparent film from

the oven and remove any accessories from inside it.

Heat the oven to 250 ° C for about one hour. The oven must

be empty during this time.

Please note: It is advisable to air the room after using the appliance

for the first time.

THANK YOU FOR BUYING A HOTPOINT-

ARISTON PRODUCT

In order to receive a more complete

assistance, please register your product on

www . hotpoint . eu/register

Before using the appliance carefully read the Safety

Instruction.

Produktspezifikationen