HP LaserJet Pro MFP M25 Bedienungsanleitung

Lies die bedienungsanleitung für HP LaserJet Pro MFP M25 (15 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 151 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 76 Bewertungen. Hast du eine Frage zu HP LaserJet Pro MFP M25 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

ไทย.........................17

한국어....................13

简体中文.................5

English1 ....................

Tiếng Việt...............25

繁體中文................21

Bahasa Indonesia9 .....

www.hp.com/support/ljmfpM25-M27 www.register.hp.com

LaserJet Pro MFP M25-M27

Getting Started Guide

IMPORTANT:

Follow Steps 1 - 3 on

the printer hardware setup

poster, then continue

with Step 4.

Windows

1. Do not connect the USB cable before installing the software.

The installation process prompts to connect the cable at the

appropriate time. If the cable is already connected, restart the

printer when installation prompts to connect the cable.

2. Continue to “5. Locate or download the software installation

les.”

NOTE: During software installation, select the option to Directly

connect this computer using a USB cable.

OS X

1. For OS X, connect the USB cable between the computer and the

printer before installing the software.

2. Continue to “5. Locate or download the software installation

les.”

Built-in wireless network connection

(nw models)

1. To connect the printer to a wireless (Wi-Fi) network, make sure

that the printer, access point, and computer are turned on and

that the computer is connected to the wireless network.

2. A USB cable will be required.

3. Disconnect any USB or Ethernet cable that is connected to the

printer.

4. To print from a computer, continue with “5. Locate or download

the software installation les.”To print from a phone or tablet

only, continue with “7. Mobile and wireless printing.”

NOTE:During software installation, select the option to Help me

set up a rst-time wireless connection. (Windows only)

Wired (Ethernet) network connection

(optional)

Use a standard network cable.

1. Connect the network cable to the printer and to the network. Wait

a few minutes for the printer to acquire a network address.

2. Continue to “5. Locate or download the software installation

les.”

NOTE: During software installation, select the option to Connect

through a network.

USB connection directly between the

printer and the computer

Use an A-to-B type USB cable.

4.

Select a connection method and prepare for software installation

Find the printer IP address (optional)

1. Press the Setup button.

2. Open Reports, then open Cong Report, and press .OK

3. Find the printer IP address in the Network Information section.

NOTE: For more information, see the User Guide.

Produktspezifikationen