HP LaserJet Pro P1109 Bedienungsanleitung

Lies die bedienungsanleitung für HP LaserJet Pro P1109 (33 Seiten) kostenlos online; sie gehört zur Kategorie Drucker. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 12 Bewertungen. Hast du eine Frage zu HP LaserJet Pro P1109 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Dansk13 .............

Català11 .............

Español9 .............

Italiano7 .............

Deutsch5 .............

Français3 ............

English1 ..............

Norsk25 ..............

Lietuvių.......... 23

Latviešu21 ..........

Suomi19 .............

Eesti ...............17

Nederlands15 ......

Svenska29 ..........

Português27 .......

5. Select a connection method and prepare for software installation

Windows

1. For Windows 7 or lower, do not connect the USB cable before installing

the software. The installation process prompts to connect the cable at

the appropriate time. If the cable is already connected, restart the printer

when installation prompts to connect the cable.

2. Continue to “6. Locate or download the software installation les.”

NOTE: During software installation, select the option to Directly connect

this computer using a USB cable.

Mac

1. Connect the USB cable between the computer and the printer before

installing the software.

2. Continue to “6. Locate or download the software installation les.”

Perform a wireless installation

(P1102w wireless models only)

Before starting the installation, verify that the wireless access point is working

correctly. Make sure that the printer, router, and computer are all turned on

and that the computer is connected to the same wireless network you want to

connect the printer to.

If there is not a solid blue light on the top of the printer, go to Process A.

If there is a solid blue light on the top of the printer, go to Process B.

Process A

1. Place the CD in the CD-ROM drive, and then click Install. When the

Printer connections dialog appears, choose Congure to print over

the Wireless Network.

2. Follow the onscreen instructions.

Process B

1. Place the CD in the CD-ROM drive, and then click Install. When the

Printer connectionsdialog appears, choose Connect to a congured

Wireless Network printer.

2. Follow the onscreen instructions.

3. Select the printer detected by the software. If the printer cannot be

detected by the installer, manually input the printer’s IP address to

continue the installation.

NOTE: Print a Conguration page to nd the printer’s IP address. At

the printer control panel, press and hold the cancel button for 5

seconds, and then release the cancel button to print the Conguration

page. TheIP address is listed on the Conguration page in the Network

Information section.

Manually congure the IP address

See the printer User Guide for information on how to manually congure the IP

address www.hp.com/support/ljp1100series.

IMPORTANT:

First, follow Steps 1 - 3

on the printer hardware

setup poster, then continue

with Step 4 to the right.

www.hp.com/support/ljp1100series www.register.hp.com

LaserJet Pro P1100 series

Getting Started Guide

USB connection directly between the

printer and the computer

Use an A-to-B type USB cable.

4. Initial setup at the control panel

At the printer control panel, check the LED status before beginning software installation.

Produktspezifikationen