Hughes & Kettner ATTAX Bedienungsanleitung
Lies die bedienungsanleitung für Hughes & Kettner ATTAX (12 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Hughes & Kettner ATTAX oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12
3-CHANNEL
G U I T A R P R E A M P L I F I E R
Hughes & Kettner Musical Instruments
GmbH
Magdeburgerstr.6 6690
St.Wendel
Telefon
(
0
68
51
)
20
21
Telefax
( 0
68
51
)
4 868
WE AT HUGHES &
KETTNER
WOULD LIKE TO CONGRATULATE
YOU ON YOUR CHOICE OF THE
ATTAX
PREAMP!
The HUGHES
&
KETTNER ATTAX preamp is designed to meet the rigorous demands
placed on contemporary musicians: superior sound quality, flexibility, and user-
friendly operating define the ATTAX as a valuable tool in your quest for the ultimate
sound.
The streamlined operating and control concept enables you to immediately dial in
hot sounds. No fuss, no endless knob twiddling.This Operator’s Manual introduces
you to the
ATTAX's
features and options.
3 CHANNELS
-
THE STANDARD OF THE
90's
The ATTAX features three separate channels: One solid state CLEAN for vintage and
contemporary clean tones. The two tube channels, CRUNCH and LEAD, are carefully
tuned for a broad overdrive spectrum, from a slight crunch to heavy duty shred.
TWO EFFECTS LOOPS!
The ATTAX features two separate loops for effects/multi-effects devices: a standard
MONO FX LOOP with SEND and RETURN jacks and a STEREO LOOP with a SEND
and two RETURN jacks (Left/Right).
STEREO SETUP
-
NO PROBLEM!
The output, effect, and master sections feature stereo circuits enabling stereo setups,
o. g. with a stereo power amp and two cabinets. Stereo effects processors can be
added through the STEREO LOOP for optimum effects utilization.
FREQUENCY-CORRECTED RECORDING OUT JACKS
The two Recording Out jacks feature frequency-corrected signal paths that simulate
the sound of a miked 4 x
12"
cabinet, an ideal tool for home recording, studio
situations, and on stage DI to the mixer.
MIDI
-
THE ULTIMATE CONTROL FEATURE!
The MIDI option requires no soldering. Installation is simple, and offers the ATTAX
user all the comfort of MIDI capabilities. All three channels and the effects loop can
be called via MIDI program change messages.
We hope you have fun and enjoy success with your ATTAX!
THE SOLID STATE CLEAN CHANNEL
This channel utilizes innovative solid state circuitry that is capable of producing
warm, dynamic vintage tones, as well as contemporary,
hi-fi
clean sounds.
The HUGHES
&
KETTNER “SOFT CLICK” circuitry delivers the soft clip of a vintage
tube amp at high volumes, except that you don’t have to alienate your neighbors to
get that warm tone. It “feels” like a vintage amp; the preamp’s dynamics and response
are true to classic tube performance criteria.
ATTAX CRUNCH
-
THE VINTAGE TUBE CHANNEL
The ATTAX CRUNCH tube channel covers the tonal spectrum from clean to
overdrive. The emphasis on attack response in this channel enables you to control
overdrive levels with your guitar’s volume pot. At higher gain settings, your tone is
carried by lengthy sustain ideal for a singing blues tone with superior dynamic punch.
AT-TAX LEAD
-
HOT-RODDED HEAVY TUBE OVERDRIVE
The LEAD channel’s extreme gain reserves deliver the distinct performance character-
istics of modified tube amps: fat, searing tube overdrive at any volume, ideal for
modern lead playing and heavy-duty power chord chunk.
SELECTING THE THREE CHANNELS: CLEAN
/
CRUNCH
/
LEAD
Channel switching is executed via the switch on the FRONT PANEL or the
included STAGEBOARD.
The CLEAN /TUBE SWITCH (5) activates either the SOLID STATE (CLEAN channel),
or the TUBE
(
CRUNCH/LEAD
)
sections.
The CRUNCH /TUBE SWITCH (12) activates either the CRUNCH or LEAD channel
in the tube section.
An LED DESIGNATES the currently ACTIVE CHANNEL.:
CLEAN
= GREEN, CRUNCH = YELLOW, LEAD = RED
Produktspezifikationen
| Marke: | Hughes & Kettner |
| Kategorie: | Nicht kategorisiert |
| Modell: | ATTAX |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hughes & Kettner ATTAX benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Hughes & Kettner
3 Juli 2025
2 Juli 2025
2 Juli 2025
26 Juni 2025
26 Juni 2025
25 Juni 2025
25 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- FCC BBQ
- Hozelock
- KS Tools
- Apogee
- Bliss Hammocks
- Savio
- Cioks
- X4-Tech
- Labelmate
- A4Tech
- SPL
- Dodow
- NGS
- GC Audio
- Zagg
Neueste Bedienungsanleitung für -Kategorien-
3 Juli 2025
3 Juli 2025
3 Juli 2025
3 Juli 2025
3 Juli 2025
3 Juli 2025
3 Juli 2025
3 Juli 2025
3 Juli 2025
3 Juli 2025