Hughes & Kettner Metal Master Bedienungsanleitung
Hughes & Kettner
Nicht kategorisiert
Metal Master
Lies die bedienungsanleitung für Hughes & Kettner Metal Master (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 3.8 Sterne aus 2 Bewertungen. Hast du eine Frage zu Hughes & Kettner Metal Master oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
Hughes & Kettner Metal Shredder / Metal Master
The controls, switches, jacks etc. of the Metal Shredder (U.S. name)/Metal Master
(European name) are nearly identical to those of the Cream Machine and Blues
Master/Crunch Master. The instructions for using the Metal Shredder/Metal Master
are therefore the same, with the following exceptions:
• The Metal Shredder/Metal Master utilizes a two-stage tube preamplifier. The two
stages can be controlled separately by means of the GAIN 1 and GAIN 2 knobs.
An infinite number of sound combinations can be attained depending on the
relationship between these two knobs, from clean or crunch to heavy overdrive.
• The MID control takes its place in the signal chain before the tube stages and its
main purpose is to adapt to the characteristics of the guitar and pickups.
• For the sake of avoiding undesirable distortion in the bass or treble range, the
BASS and TREBLE controls are positioned in the signal chain after the tube
stages.
• The Metal Shredder/Metal Master has a separate headphone jack (PHONES). This
jack is turned ON or OFF with the back panel switch marked Phones.
• The Phones switch serves a second function as well. At the same time that it
switches the headphone jack on, it also applies CABINET SIMULATOR circuitry
(like in the Hughes & Kettner Red Box) to the signal appearing at the SPEAKER
OUT jack. This will give hi- speakers or full-range P.A. speakers connected to
this jack the sound character of a guitar loudspeaker. (Warning! If you connect
hi-fi, full-range speakers to the SPEAKER OUT jack, make sure you use the
Cabinetulator circuitry by pressing in the red Phones switch, or else you
might blow your speakers’ high-frequency drivers out!)
• The TUBE AMP VOLUME control determines the overall output level of the Metal
Master/Metal Shredder at the SPEAKER OUT, but not does affect the Bypass
signal.
• The Metal Master/Metal Shredder has an integral 4½-watt solid-state power amp
for connecting a guitar loudspeaker cabinet or – in the manner described above –
a hi-fi speaker cabinet.
Bypass function
As with the Cream Machine and the Blues Master/Crunch Master, the BYPASS output
signal can be used with or without the Cabinet Simulator circuitry, or switched off
completely. In contrast to the Cream Machine and Blues Master/Crunch Master, the
internal switches, which set how Bypass works, are as follows:
Produktspezifikationen
| Marke: | Hughes & Kettner |
| Kategorie: | Nicht kategorisiert |
| Modell: | Metal Master |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hughes & Kettner Metal Master benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Hughes & Kettner
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Kingston Technology
- Kitchenware
- AS Schwabe
- VOREL
- Salus
- Platinet
- Devolo
- Zeiss
- Air Guard
- LISS
- Speco Technologies
- Zenit
- Oehlbach
- Thrustmaster
- Patton
Neueste Bedienungsanleitung für -Kategorien-
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025