Husqvarna 357 XP Bedienungsanleitung
Lies die bedienungsanleitung für Husqvarna 357 XP (44 Seiten) kostenlos online; sie gehört zur Kategorie Säge . Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 14 Bewertungen. Hast du eine Frage zu Husqvarna 357 XP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/44
EEEEnnnngggglllliiiisssshhhh
357XP/XPG
, 357XP E-tech
357XPG E-tech
359/G, 359 E-tech, 359G E-tech
Oper
ator
′
s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions before using the
machine.
KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European
Community’s Directive. The machine’s
emission is specified in chapter
Technical data and on label.
WARNING!
Decompression v
alve:
The valve is to
reduce the pressure in the cylinder and
make starting easier. You should always
use the decompression valve when
starting the machine.
Ignition;
choke:
Set the choke control
in the choke position. This should
automatically set the stop switch to the
start position.
Air purge
Adjustment of the oil pump
If your machine bears this symbol
it is equipped with a catalytic
converter.
Chain brake, activated (right)
Chain br ake, not activated
(left)
Other symbols/decals on
the machine refer to special
certification requirements
for certain markets.
Symbols in the operator’
s
manual:
Switch o the engine b
y moving the
stop switch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must
be worn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain saw is started.
WARNING! Kickback may occur
when the nose or tip of the guide bar
touches an object, and cause a
lightning fast reverse reaction, kicking
the guide bar up and towards the
operator. May cause serious personal
injury.
CONTENTS
English
–
3
Contents
KEY
TO SYMBOLS
Symbols on the machine:
..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents
............................................................... 3
INTR
ODUCTION
Dear Customer
, .................................................... 4
WHA
T IS WHAT?
What is what on the chain sa
w? ........................... 5
GENERAL SAFETY PRECA
UTIONS
Bef
ore using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 7
Personal protective equipment ............................. 7
Machine
′
s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL
Y
Fitting the bar and chain
....................................... 17
FUEL HANDLING
Fuel
...................................................................... 18
Fuelling ................................................................. 19
Fuel safety ............................................................ 19
ST
ARTING AND STOPPING
Star
ting and stopping ........................................... 20
W
ORKING TECHNIQUES
Bef
ore use: ........................................................... 22
General working instructions ................................ 22
How to avoid kickback .......................................... 29
MAINTENANCE
Gener
al ................................................................. 30
Carburettor adjustment ......................................... 30
Carburettor with movement limiters ...................... 30
Carburettor without movement limiters ................. 31
Checking, maintaining and servicing chain saw
safety equipment .................................................. 33
Muffler .................................................................. 35
Starter .................................................................. 35
Air filter ................................................................. 36
Spark plug ............................................................ 37
Lubricating the bar tip sprocket ............................ 37
Needle bearing lubrication ................................... 37
Adjustment of the oil pump ................................... 37
Cooling system ..................................................... 38
”Air Injection” centrifugal cleaning ........................ 38
Winter use ............................................................ 38
Heated handles .................................................... 39
Maintenance schedule ......................................... 40
T
echnical data
T
echnical data ....................................................... 41
Bar and chain combinations ................................. 42
Saw chain filing and file gauges ........................... 42
EC-declaration of conformity ................................ 43
Produktspezifikationen
| Marke: | Husqvarna |
| Kategorie: | Säge |
| Modell: | 357 XP |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Husqvarna 357 XP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Säge Husqvarna
12 Mai 2024
13 April 2024
13 April 2024
13 April 2024
13 April 2024
13 April 2024
10 April 2024
4 März 2024
12 Februar 2024
10 Februar 2024
Bedienungsanleitung Säge
- Remington
- Bullcraft
- Mafell
- Novatec
- OK
- Holzmann
- Hikoki
- Workzone
- AEG
- Powerplus
- Ridgid
- XU1
- EGO
- Hazet
- Worx
Neueste Bedienungsanleitung für -Kategorien-
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025