Husqvarna 362D28 Bedienungsanleitung
Husqvarna
Nicht kategorisiert
362D28
Lies die bedienungsanleitung für Husqvarna 362D28 (21 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 11 Bewertungen. Hast du eine Frage zu Husqvarna 362D28 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/21
2 - English
Safety first
Instructions contained in warnings within this
manual and warning seals marked with a
symbol on the product concern critical points
which must be taken into consideration to
prevent possible serious bodily injury, and for
this reason you are requested to read all such
instructions carefully and follow them without fail.
Safety
Safety ......................................................................2
Warning labels on the machine ...............................3
Symbols on the machine .........................................3
What is what? .........................................................3
Technical data .........................................................4
Safety Precautions ..................................................5
Assembly ................................................................9
Fuel ....................................................................... 11
Operation ..............................................................12
Maintenance .........................................................16
Storage .................................................................18
Disposal ................................................................18
Mist kit (Available as accessory) ...........................19
Notes on types of warnings
WARNING
Instructions labeled as shown above, concern
critical steps or procedures which must be
followed in order to prevent accidents which
could lead to serious bodily injury or death.This
mark is used to indicate instructions which must
be followed without exception.
IMPORTANT
Instructions labeled as shown above concern
steps or procedures which, if not followed
correctly, could lead to mechanical failure,
breakdown, or damage.
NOTE
Used to label supplementary instructions
designed to provide hints or directions useful in
the use of the product.
Contents
English - 3
Warning labels on the machine
(1) (2) (4) (5)
(1) Read the operator’s manual carefully and
make sure you understand the instructions
before using the machine.
(2) Wear a protective mask, eye and ear
protection.
(3) Wear foot protection.
(4) Wear gloves.
(5) WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or fatal
injury to the operator or others.
Symbols on the machine
The port to refuel the “MIX
GASOLINE”
Position: FUEL TANK CAP
The direction to open the choke
Position: CARBURETTOR BODY
(3)
For safe operation and maintenance, symbols
are carved in relief on the machine. According
to these indications, be careful not to make a
mistake.
IMPORTANT
If the warning label peels off or becomes soiled
and impossible to read, you should contact the
dealer from which you purchased the product to
order new labels and afx them in the required
location(s).
What is what?
(1) Flexible hose
(2) Clamp
(3) Wire
(4) Joint
(5) Straight pipe
(6) Bent pipe
Produktspezifikationen
| Marke: | Husqvarna |
| Kategorie: | Nicht kategorisiert |
| Modell: | 362D28 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Husqvarna 362D28 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Husqvarna
2 Oktober 2024
1 Oktober 2024
1 Oktober 2024
17 September 2024
6 September 2024
5 September 2024
4 September 2024
4 September 2024
31 August 2024
24 August 2024
Bedienungsanleitung Nicht kategorisiert
- Urban Glide
- Create
- Rockboard
- Baja Mobility
- FERM
- Adapt
- Mulex
- Morel
- Sharkoon
- Dayclocks
- Winegard
- Showtec
- Sanus
- Furman
- Accucold
Neueste Bedienungsanleitung für -Kategorien-
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025