Husqvarna Rider 316T AWD Bedienungsanleitung
Husqvarna
Nicht kategorisiert
Rider 316T AWD
Lies die bedienungsanleitung für Husqvarna Rider 316T AWD (36 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 41 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 21 Bewertungen. Hast du eine Frage zu Husqvarna Rider 316T AWD oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/36
EE
EEnn
nngg
ggll
llii
iiss
sshh
hh
Rider 316T Rider 316T
AWD
Rider 316Ts AWD Rider 316TXs AWD
Oper
ator
′
s manual
Please r
ead the operator’s manual carefully and make sure you
understand the instructions before using the machine.
2
–
English
CONTENTS
Contents
CONTENTS
Contents
...................................................................... 2
Ser
vice journal
Pre-deliv
ery service ..................................................... 3
After the first 8 hours ................................................... 3
INTR
ODUCTION
Dear Customer
, ............................................................ 4
Driving and transport on public roads .......................... 4
Towing .......................................................................... 4
Use .............................................................................. 4
Good service ................................................................ 4
KEY
TO SYMBOLS
Symbols
....................................................................... 5
WHA
T IS WHAT?
What is what on the r
ide-on mower ............................. 7
SAFETY INSTR
UCTIONS
Saf
ety instructions ........................................................ 8
Driving on slopes ......................................................... 9
Children ....................................................................... 10
Maintenance ................................................................ 10
Transport ...................................................................... 11
PRESENT
ATION
Presentation
................................................................. 12
Throttle trigger ............................................................. 12
Choke control ............................................................... 12
Speed limiter ................................................................ 12
Parking brake ............................................................... 12
Cutting unit ................................................................... 12
Lifting lever for the cutting unit ..................................... 13
Cutting height adjustment lever ................................... 13
Lights ........................................................................... 13
Counter ........................................................................ 13
Seat ............................................................................. 13
Fueling ......................................................................... 13
Release lever ............................................................... 14
Driving
Bef
ore starting ............................................................. 15
Start the engine ........................................................... 15
Starting the engine with a weak battery ....................... 16
Driving the Rider .......................................................... 16
Cutting tips .................................................................. 17
Stop the engine ............................................................ 17
Maintenance
Maintenance schedule
................................................. 18
Cleaning ....................................................................... 19
Removing of the machine hoods ................................. 19
Checking and adjusting the steering wires .................. 19
Adjusting the parking brake Rider 316T ....................... 20
Adjusting the parking brake ......................................... 20
Checking and adjusting of throttle wire ........................ 20
Checking and adjusting the choke wire ....................... 21
Replacement of fuel filter ............................................. 21
Checking the fuel pump’s air filter ................................ 21
Replacing the air filter .................................................. 21
Ignition system ............................................................. 22
Check the safety system .............................................. 22
Replacing the light bulbs .............................................. 22
Main fuse ...................................................................... 23
Checking the tyre pressure .......................................... 23
Checking the engine’s cooling air intake ...................... 23
Fitting the cutting head ................................................. 24
Removing the cutting unit ............................................. 25
Checking and adjustment of the cutting unit’s ground
pressure .......................................................................25
Checking the cutting unit’s parallelism ......................... 25
Adjusting the parallelism of the cutting unit .................. 26
Replacing the cutting unit belts .................................... 26
Service position for the cutting unit .............................. 27
Checking the blades ..................................................... 28
Removing the BioClip plug ........................................... 28
Lubrication
Chec
king the engine’s oil level. .................................... 29
Changing the oil filter ................................................... 29
Checking the transmission oil level .............................. 30
Lubricating the belt adjuster ......................................... 30
General lubrication ....................................................... 30
T
roubleshooting schedule
Storage
Winter stor
age .............................................................. 32
Guard ........................................................................... 32
Service ......................................................................... 32
T
echnical data
EC-declar
ation of conformity ........................................ 35
English
–
3
Ser
vice journal
Pre-deliver
y service
1
Charge the battery for 4 hours at max. 3 amp.
2 Fit steering wheel, seat and any optional
equipment.
3 Check and adjust tyre pressure (60 Kpa, 0.6 bar,
9 PSI).
4 Adjust cutting unit:
Adjust lift springs (effective weight of cutting unit
should be 12-15kg / 26.5-33 lb).
Adjust cutting unit so that rear edge is about 2-4
mm / 1/8” higher than front edge.
Adjust the cutting unit’s cutting height setting so
that the connection rod is tensed at the lowest
cutting height.
5 Check that the right amount of oil is in the engine.
6 Check that there is oil in the transmission’s oil
tank.
7 Connect battery.
8 Fill with fuel and start engine.
9 Check that machine does not move in neutral.
10 Check:
Forward drive.
Reverse drive.
Operation of blades.
Seat safety switch.
Lif lever safety switch.
The safety switch for the hydrostat pedals.
11 Check the engine speed See the Technical data
section.
12 Check the synchronisation between the front and
rear wheels. (Only AWD-machines) See the
workshop manual.
13 Tell customer about:
Needs and benefits of following the service
schedule.
Servicing and the influence of this journal on the
second-hand value of the machine.
Range of applications for BioClip.
Complete proof of sale etc.
Pre-delivery service carried out. No outstanding problems.
Certified:
_______________________________________________
Date, mileage, stamp, signature
After the first 8 hours
1
Change engine oil
2 Change the oil in the gearbox. (Only AWD-
machines)
3 Check the synchronisation between the front and
rear wheels. (Only AWD-machines)
Produktspezifikationen
| Marke: | Husqvarna |
| Kategorie: | Nicht kategorisiert |
| Modell: | Rider 316T AWD |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Husqvarna Rider 316T AWD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Husqvarna
2 Oktober 2024
1 Oktober 2024
1 Oktober 2024
17 September 2024
6 September 2024
5 September 2024
4 September 2024
4 September 2024
31 August 2024
24 August 2024
Bedienungsanleitung Nicht kategorisiert
- Beghelli
- Schneider
- Schatten Design
- Command
- Royal Catering
- Umarex
- Schellenberg
- Devialet
- Aeon Labs
- Star Micronics
- NUVO
- IPort
- IDENTsmart
- Auriol
- SEB
Neueste Bedienungsanleitung für -Kategorien-
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025