Icom IC-7300 Bedienungsanleitung
Lies die bedienungsanleitung für Icom IC-7300 (72 Seiten) kostenlos online; sie gehört zur Kategorie Radio. Dieses Handbuch wurde von 64 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 32.5 Bewertungen. Hast du eine Frage zu Icom IC-7300 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/72

BASIC MANUAL
i7300
HF/50 MHz TRANSCEIVER

i
Thank you for choosing this Icom product. The IC-7300 is designed and built with Icom’s HF/50 MHz TRANSCEIVER
state of the art technology and craftsmanship. With proper care, this product should provide you with years of
trouble-free operation. We appreciate you making the IC-7300 your transceiver of choice, and hope you agree
with Icom’s philosophy of “technology rst.” Many hours of research and development went into the design of
your IC-7300.
FEATURES
• RF Direct Sampling System
The IC-7300 employs an RF direct sampling system.
RF signals are directly converted to digital data and
processed in the FPGA. This system is a leading
technology marking an epoch in amateur radio.
• Real-Time Spectrum Scope
The spectrum scope is class-leading in resolution,
sweep speed and dynamic range. When you touch the
scope screen on the intended signal, the touched area is
magnied. The large 4.3 inch color TFT touch LCD offers
intuitive operation.
• New “IP+” Function
The new IP Plus function improves 3rd order intercept
point (IP3) performance. When a weak signal is received
adjacent to strong interference, the AD converter is
optimized against signal distortion.
• Class Leading RMDR and Phase Noise
Characteristics
The RMDR is improved to about 97dB (typical value) and
Phase Noise characteristics are also improved about
15dB (at 1 kHz frequency separation) compared to the
IC-7200.
• A 4.3 inch touch panel color display
• A built-in automatic antenna tuner
• Multi-function control for easy settings
SUPPLIED ACCESSORIES
L Different types of accessories may be supplied, or may
not be supplied depending on the transceiver version.
WORD DEFINITION
R DANGER! Personal death, serious injury or an
explosion may occur.
R WARNING! Personal injury, fire hazard or electric
shock may occur.
CAUTION Equipment damage may occur.
NOTE
Recommended for optimum use. No
risk of personal injury, fire or electric
shock.
EXPLICIT DEFINITIONS
IMPORTANT
READ ALL INSTRUCTIONS carefully completely
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL— This
instruction manual contains full operating instructions
for the IC-7300
.
Hand microphone
(HM-219)
DC power cable*
(3 m: 9.8 ft)
Spare fuse
(25 A)
Spare fuse
(30 A)
Spare fuse
(5 A)
CD
Speaker plug
(3.5 mm: 1/8" Stereo)
CW key plug
(6.35 mm: 1/4" Stereo)
ACC plug
(13 pin)
This product includes RTOS “RTX” software, and is
licensed according to the software license.
This product includes “zlib” open source software,
and is licensed according to the open source
software license.
This product includes “libpng” open source software,
and is licensed according to the open source
software license.
Refer to the Text les in the License folder of
included CD for information on the open source
software being used by this product.
*For European versions

ii
• FOR CLASS B UNINTENTIONAL RADIATORS:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
DISPOSAL
The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in
the European Union, all electrical and electronic products, batteries, and accumulators
(rechargeable batteries) must be taken to designated collection locations at the end of their work-
ing life. Do not dispose of these products as unsorted municipal waste.
Dispose of them according to the laws in your area.
FCC INFORMATION
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
WARNING: MODIFICATION OF THIS DEVICE
TO RECEIVE CELLULAR RADIOTELEPHONE
SERVICE SIGNALS IS PROHIBITED UNDER FCC
RULES AND FEDERAL LAW.
CAUTION: Changes or modications to this device,
not expressly approved by Icom Inc., could void
your authority to operate this device under FCC
regulations.
Icom is not responsible for the destruction or damage to the Icom transceiver, if the malfunction is because of:
• Force majeure, including, but not limited to, res, earthquakes, storms, oods, lightnings, or other natural
disasters, disturbances, riots, war, or radioactive contamination.
• The use of Icom transceiver with any equipment that is not manufactured or approved by Icom.
TRADEMARKS
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the
United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand and/or other countries.
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other
countries.
Adobe and Adobe Reader are registered trademark of Adobe Systems Incorporated.
All other products or brands are registered trademarks or trademarks of their respective holders.
Produktspezifikationen
Marke: | Icom |
Kategorie: | Radio |
Modell: | IC-7300 |
Display-Typ: | LCD |
Breite: | 240 mm |
Tiefe: | 238 mm |
Produkttyp: | Tragbares CB-Handfunkgerät |
Produktfarbe: | Schwarz |
Höhe: | 94 mm |
Gehäusematerial: | Stahl |
Anzahl Kanäle: | 101 Kanäle |
Frequenzbereich: | 0.5 - 70 MHz |
Mikrofon enthalten: | Ja |
Ausgangsleistung: | 100 W |
Eingangsspannung: | 13.8 V |
Kompatible Produkte: | AH-2B; AH-4; AH-5NV; AH-710; AH-740; CT-17; HM-219; MB-118; MB-123; OPC-2321; OPC-420; OPC-599; PS-126; RC-28; SM-30; SM-50; SP-23; SP-33; SP-34; SP-35; SP-35L; SP-38; SP-41; |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Icom IC-7300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Radio Icom
9 August 2024
6 August 2024
6 August 2024
29 Juli 2024
28 Juli 2024
19 Juli 2024
14 Juli 2024
9 Juli 2024
22 Mai 2024
10 April 2024
Bedienungsanleitung Radio
- Hikoki
- Omnitronic
- Elta
- Majority
- Audiovox
- Tiny Audio
- Insignia
- Cotech
- TEAC
- GPX
- Denver
- Clas Ohlson
- Tecsun
- Hilti
- ION
Neueste Bedienungsanleitung für -Kategorien-
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025