Iconbit FTB5200U Bedienungsanleitung

Iconbit powerbank FTB5200U

Lies die bedienungsanleitung für Iconbit FTB5200U (1 Seiten) kostenlos online; sie gehört zur Kategorie powerbank. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 9 Bewertungen. Hast du eine Frage zu Iconbit FTB5200U oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
Keep your power bank operating to the fullest potential, by
following the below steps:
1. Re-charge your power bank once every three months
when it is not in use.
2. Keep the power bank away from any moist environment
and corrosive material.
3. Never wash the power bank with any chemicals, soaps
or detergents.
1. Simply using the attached USB cable to charge the digital
product, One end of the USB cable connect with the "OUT"
port of the power bank, another end connect with the
digital product with converted tip. Press "ON" button once,
it will start to charge and the green LED will indicate the
charging process.
2. Finishing charging or fail to connect the digital product,
the green LED will stop ashing. And the power bank
will turn o automatically after 30 seconds.
3. When on charging process, the green LED ashes quickly
means low power and need to charge the power bank
in time.
Note: If the instantaneous current is oversize when charging
the digital product, the power bank will turn to protected
mode automatically. To relieve the protected mode just
charge the power bank.
The "IN" port is the charging port of the power bank. The
red LED will light on when charge the power bank, after
full charging, the red LED will light o.
1. Turn ON button
2. USB output port
3. DC5V input port


Produktspezifikationen

Marke: Iconbit
Kategorie: powerbank
Modell: FTB5200U

Brauchst du Hilfe?

Wenn Sie Hilfe mit Iconbit FTB5200U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten