IFi Audio hip-dac Bedienungsanleitung

Lies die bedienungsanleitung für IFi Audio hip-dac (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 4 Bewertungen. Hast du eine Frage zu IFi Audio hip-dac oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Formats supported:

Digital Inputs:

Headphone Output:

Power Output:

Battery:

Power System:

Power (max):

Dimensions:

Weight:

Warranty period:

Specifications are subject to change without notice.

DSD256/128/64,

Octa/Quad/Double/Single-Speed DSD

DXD(384/352.8kHz),

PCM(384/352.8/192/176.4/96/88.2/

48/44.1kHz)

MQA

USB 3.0 type ’A’

High-Speed Asynchronous USB 2.0

(32bit/384kHz)

Balanced 4.4mm

Single-Ended 3.5mm

BAL:400mW@32; 6.3V@Ω600Ω

S-BAL(SE): 280mW@32; 3.2V@Ω600Ω

Lithium-polymer 2200mAh

Charging via USB-C

BC V1.2 compliant up to 1000mA

charging current

<2W idle, 4W max

102(l) x 70(w) x 14(h) mm

125g (0.28 lbs)

12 months

Specifications

7. USB3.0 'Type A' data input port

Connect your phone to hip-dac with Lightning to USB Camera

Adapter (Apple) or USB On-The-Go (OTG) cable (Android). When

using other audio sources connect with a USB cable.

Tip: It is preferable to use a USB 3.0 port over using a USB 2.0 port on the PC.

8. USB-C (5V) battery charge input

For charging only. It will take ~3 hours for a high-powered USB

charger to fully charge hip-dac.

9. LED for Battery Status

LED Status

White* > 75%

Green*25% >

Red*10% >

Red (flashing)10% ≤

*Battery LED will flash when it is charging

ifi-audio.com

Ver1.3

1. PowerMatch® (on/off)

PowerMatch® enables hip-dac to match headphones’ impedance

and sensitivity in order to generate their highest operational

efficiency.

Tip: For in-ear-monitors (earbuds) try PowerMatch® off.

For headphones try PowerMatch® on.

2. XBass® (on/off)

Many headphones lack the correct bass response. XBass® is an

analogue circuit designed to 'add back' the lost bass response for a

more accurate reproduction of the original music.

3. Audio Format LED (kHz)

The LED colour scheme indicates the audio format and sampling

frequency received by hip-dac from the music source.

LEDMode

Green 44/48/88/96kHz

Yellow 176/192kHz DXD352/384kHz

Cyan DSD128/DSD64 2.8/3.1/5.6/6.2MHz

Blue DSD25611.2/12.2MHz

Magenta MQA

Off No valid signal

312564

4. ON/OFF and Analogue Volume Control

The analogue volume control in hip-dac is superior to any digital

volume control.

Warning: Due to the high power of hip-dac, always start off at a low volume level so

that there is no risk of damage to your headphones and your hearing. iFi audio is not

responsible for any hearing or equipment damage from misuse.

Power ON. Power OFF.

Tip: hip-dac will continue to use battery power even if the USB cable is connected

afterwards.

Tip: For connection to Apple devices, Apple Lightning to USB Camera Adapter is

required. For connection to Android devices, USB On-The-Go (OTG) cable and

appropriate OS support are required.

For more information, please refer to www.ifi-audio.com.

5. Balanced 4.4mm headphone output

Connect balanced 4.4mm headphones.

6. Single-ended 3.5mm headphone output

Connect single-ended 3.5mm headphones.

879

H

H

H

HH

a

a

a

aa

p

p

p

p pc

c

c

cc

d

d

d

dd

OFF

Produktspezifikationen