IFi Audio PowerStation Bedienungsanleitung

Lies die bedienungsanleitung für IFi Audio PowerStation (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 7 Bewertungen. Hast du eine Frage zu IFi Audio PowerStation oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1. Power ON/OFF

2. Power inlet IEC

Connect to the wall outlet .

Tips:

• You can insert your existing AC iPurifiers into the PowerStation

to enhance your system.

• The more AC iPurifiers used, the cleaner the overall power.

• On the PowerStation, if an AC iPurifier is placed in the middle,

this AC iPurifier will also act as a extra noise shield. Any noise is

reduced, isolated and confined to the respective left/right

sections of the AC iPurifier.

3Polarity/Earth detection.

The following table depicts the different readings and the

respective LED colour combinations. Where needed, make the

necessary system adjustments.

4 Ground/Earth. connection

The 4mm banana socket fitted to the PowerStation can be used

to create a supplementary ground/earth connection for audio

systems where there is no ground/earth present.

The supplementary ground/earth connection is ‘smart’ as it will

NOT introduce a ground loop EVEN if the system is already

earthed (as more than one earth also creates a ground loop).

5. Over-voltage Surge Protection

In the rare instance of excessive Over-voltage OR a short in the

mains electricity, the Over-voltage Surge Protection (OSP) is an

auto detection and cut-off circuit.

It will take several minutes for the PowerStation to reboot BUT if

the Over-voltage or short persists, then the PowerStation will

NOT power on, thereby protecting the downstream audio

system from harm. If this occurs, please have a qualified

electrician inspect your mains.

Disclaimer: Although the PowerStation does its utmost to protect

the audio system from electric harm, AMR/iFi does not guarantee

this.

Features

• Active Noise Cancellation2 technology

TM

• Solid PurCopper Bus-Bars for power transfer

• Individual noise isolation chambers - for each outlet

TM

• High-performance PurCopperoutlets

• Heavy OFHC Continuous Cast Copper internal wiring

• Polarity and earth diagnostic system

• Advanced surge & transient protection system

• Dedicated chassis grounding system

• 2500W-10A MAX 250〜

Specifications

Noise reduction:

Surge Protection:

Operating Voltage:

Dimensions:

Weight:

Warranty period:

Specifications are subject to change without notice.

CAUTION: RISK OF ELECTRIC SHOCK DO NOT PLUG INTO ANOTHER RELOCATABLE

POWER TAP. TO REDUCE THE RISK OF ELECTRIC SHOCK, USE ONLY INDOORS AND

IN DRY LOCATIONS.

DO NOT INSTALL THIS DEVICE IF THERE IS NOT AT LEAST 10 METERS OR WIRE

BETWEEN THE ELECTRICAL OUTLET AND THE ELECTRICAL SERVICE PANEL.

NO FOR USE WITH AQUARIUMS AND ALL OTHER WATER-RELATED PRODUCTS.

Ver1.1

ifi-audio.com

PowerStation

Earth

Polarity

312

4

Polarity Earth Status

2

Polarity error. Live and Neutral

connections are reversed.

Ground error. Earth is missing

or faulty (e.g. resistance too high).

3

Red

Cut-out mode. Over-voltage

or an electrical short.

4

OffOff

Red

Red

1

(LED) (LED)

Normal

GreenGreen

Green

> 40dB (> 100x)

max. 30,000A @ 1,000V/10uS

90V - 265V

478(l) x96 (w) x76 (h) mm

1.98kg (4.37 Ibs)

12 months

Produktspezifikationen