IFM E30131 Bedienungsanleitung


Lies die bedienungsanleitung für IFM E30131 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 8 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 4.5 Bewertungen. Hast du eine Frage zu IFM E30131 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Installation Instructions
Adapter
E30131
706005/00 05/2011
UK
ifm electronic gmbh • Friedrichstr. 1 • 45128 Essen • Germany
http://www.ifm.com • e-mail: info@ifm.com
2
Mounting sensor - adapter
D
A
B
C
1 2 3
Slightly grease the threads and sealing areas of the sensor and adapter with
the lubricating paste (A).
The paste must be suitable and approved for the application and compatible
with the elastomers used.
Place the sealing ring (B) in the groove (C) of the sensor.
The adapter is supplied with an EPDM O-ring. More sealing rings are available
as accessories: FKM O-ring, order no. E30123.
Screw the sensor into the adapter until it is hand-tight.
Clamp the sensor + adapter into a clamping device (D). Tighten the clamping
device only slightly so that the adapter does not warp.
Tighten the sensor using a spanner until you can feel the end stop (this cor-
responds to a maximum tightening torque of 35 Nm). Note: Further tightening
may affect the sealing effect.
Technical data and further information at www.ifm.com


Produktspezifikationen

Marke: IFM
Kategorie: Nicht kategorisiert
Modell: E30131

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM E30131 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten