IFM MX5015 Bedienungsanleitung


Lies die bedienungsanleitung für IFM MX5015 (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 8 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 4.5 Bewertungen. Hast du eine Frage zu IFM MX5015 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/5
Installation instructions
Speed sensor
MX5xxx
MX5xxx / 00 07 / 2015
UK
UK
UK
UK
UK
2
1 Preliminary note
1.1 Symbols used
Instruction
Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note.
2 Functions and features
The sensor detects without contact the rotational speed and the direction of rota-
tion of a toothed wheel made of ferromagnetic metal (e.g. mild steel) and signals
this with the switching signals A and B (24 V pulse). The pulse outputs enable the
external evaluation of rotational speed and direction of rotation.
See data sheet for sensing range and operating voltage.
3 Installation
3.1 Fixation
15
2
5
°
9
M6
Secure the unit against loosening by means of an M6 screw (not included).
3
UK
3.2 Alignment
Align the mounting lug parallel to the toothed wheel.
Other positions generate faulty or missing switching signals.
A surface characteristic of 15H7 is required for compliance with the protection
rating IP 69K.
4 Electrical connection
The sensor must be connected by a qualified electrician.
Observe the national and international regulations for the installation of
electrical equipment.
Disconnect power.
Connect the unit as specified in the data sheet.


Produktspezifikationen

Marke: IFM
Kategorie: Nicht kategorisiert
Modell: MX5015

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM MX5015 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten