IFM O4E201 Bedienungsanleitung


Lies die bedienungsanleitung für IFM O4E201 (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu IFM O4E201 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/3
Installation instructions
Through-beam sensor
O4S2xx / O4E2xx
706270 / 00 11 / 2012
UK
2
Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switched signal.
Range: 50 m.
Installation
12
1: Transmitter
2: Receiver
Mount the receiver (O4E ...) by means of a mounting fixture. Then align the trans-
mitter (O4S ...) to the receiver and fix it in the same way.
Maximum range is only achieved with precise alignment.
Electrical connection
Disconnect power before connecting the sensor. Connection strictly to the
indications on the type label.
Operation
Check the safe functioning of the sensor.
• The green LED (transmitter) lights when the unit is ready for operation.
• The yellow LED lights (receiver) when the switching output is switched.
Maintenance
Keep the lens of the sensor free from soiling. For cleaning do not use any solvents
or cleaning agents which could damage the plastic lenses.
3
UK
Technical data
You can download the data sheet from the Internet address www.ifm.com if
required.


Produktspezifikationen

Marke: IFM
Kategorie: Nicht kategorisiert
Modell: O4E201

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM O4E201 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten