IFM O4E501 Bedienungsanleitung


Lies die bedienungsanleitung für IFM O4E501 (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 15 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 8 Bewertungen. Hast du eine Frage zu IFM O4E501 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/5
Operating instructions
Through-beam sensor
O4E5xx / O4S5xx
706274 / 00 11 / 2012
UK
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
Range: → type label.
3 Installation
transmitter receiver
Install the receiver (O4E...) and secure it to a bracket.
Align the transmitter (O4S ...) to the receiver and secure it in the same way.
Maximum range only with accurate alignment.
3
UK
4 Operating and display elements
1
2
3
1: LED yellow
2: [OUT on] button
3: [OUT off] button
receiver
5 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of
electrical equipment must be adhered to.
Ensure voltage supply to EN 50178.
Disconnect power.
Connect the unit as follows:
Transmitter connector
1
3
L+
L
pin 1 = L+
(pin 2: not connected)
pin 3 = L-
(pin 4: not connected)
Transmitter cable *


BN = L+
BU = L-
Receiver connector
pin 1 = L+
(pin 2 = not connected)
pin 3 = L-
pin 4 = load


Produktspezifikationen

Marke: IFM
Kategorie: Nicht kategorisiert
Modell: O4E501

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM O4E501 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten