IFM O4P500 Bedienungsanleitung


Lies die bedienungsanleitung für IFM O4P500 (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 9.5 Bewertungen. Hast du eine Frage zu IFM O4P500 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/5
Operating instructions
Retro-reflective sensor
O4P5xx
706275 / 00 11 / 2012
UK
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
In conjunction with a prismatic reflector or reflective tape the retro-reflective sen-
sor detects objects and materials without contact and indicates their presence by
a switching signal.
Range: (→ type label).
3 Installation
Fit the prismatic reflector or the reflective tape behind the object to be detected.
Align the retro-reflective sensor to it and secure it to a bracket.
Maximum range only with accurate alignment.
3
UK
4 Operating and display elements
1
2
3
1: LED
2: [OUT on] button
3: [OUT off] button
5 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electri-
cal equipment must be adhered to.
Ensure voltage supply to EN 50178.
Disconnect power.
Connect the unit as follows:
Connector
pin 1 = L+
(pin 2 = not connected)
pin 3 = L-
pin 4 = load
Cable



BN = L+
BU = L-
BK = load
Core colours: BN = brown, BU = blue, BK = black


Produktspezifikationen

Marke: IFM
Kategorie: Nicht kategorisiert
Modell: O4P500

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM O4P500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten