IFM OGE081 Bedienungsanleitung


Lies die bedienungsanleitung für IFM OGE081 (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 5.5 Bewertungen. Hast du eine Frage zu IFM OGE081 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/3
Operating instructions
Through-beam sensor
OGE08x
OGS08x 
704942 / 00 10 / 2010
UK
2
1  Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
For the range see the type label.
2  Installation
Install the receiver (OGE08x) and secure it to a bracket.
Align the transmitter (OGS08x) to the receiver and secure it also to a bracket.
> Maximum range only with accurate alignment.
3  Electrical connection
Disconnect power.
Connect the unit as follows.
The device shall be protected by a Listed fuse rated 2A max
Recommendation: check the unit for reliable function after a short
circuit
3.1  Transmitter
2
3
L1
N
3
UK
3.2  Receiver
2
3
L1
N
4  Operation
Check whether the sensor operates correctly.
Receiver (OGE08x): The yellow LED is lit when the switching output is swit-
ched.
Transmitter (OGS08x): The green LED is lit when the sensor is ready for
operation.
5  Maintenance
Keep the lens of the sensor free from soiling.
For cleaning do not use any solvents or cleaning agents which could damage
the plastic material.


Produktspezifikationen

Marke: IFM
Kategorie: Nicht kategorisiert
Modell: OGE081

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM OGE081 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten