IFM VSE003 Bedienungsanleitung
IFM
Nicht kategorisiert
VSE003
Lies die bedienungsanleitung für IFM VSE003 (10 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 7 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 4 Bewertungen. Hast du eine Frage zu IFM VSE003 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/10

Operating instructions
Diagnostic electronics
for vibration sensors
VSE003
80289760/00 03/2020
UK

2
Contents
1 Preliminary note 3 ���������������������������������������������������������������������������������������������������
2 Safety instructions 3 �����������������������������������������������������������������������������������������������
3 Functions and features 3 ����������������������������������������������������������������������������������������
4 Installation������������������������������������������������������������������������������������������������������������5
4�1 Installation of the sensors 5 ������������������������������������������������������������������������������
5 Electrical connection 5 ��������������������������������������������������������������������������������������������
5�1 Limited voltage / current 6 ��������������������������������������������������������������������������������
5�2 Wiring�������������������������������������������������������������������������������������������������������������6
5�2�1 Wiring of the sensors 1���4 (S1���S4) according to the sensor 7 ��������������
5�3 Connection of the sensors 7 �����������������������������������������������������������������������������
5�3�1 Monitoring the sensor cable 8 �����������������������������������������������������������������
5�4 Ethernet connection 8 ���������������������������������������������������������������������������������������
5�5 IP address 8 ������������������������������������������������������������������������������������������������������
6 Operation �������������������������������������������������������������������������������������������������������������8
6�1 Settings ���������������������������������������������������������������������������������������������������������8
7 Indicators (LEDs) 9 �������������������������������������������������������������������������������������������������
8 Maintenance, repair and disposal 10 ����������������������������������������������������������������������
9 Scale drawing 10 ����������������������������������������������������������������������������������������������������

3
UK
1 Preliminary note
• An instruction is indicated by "►":
Example: ► Mount the unit as shown.
Important note
Non-compliance may result in malfunction or interference�
Information
Supplementary note
2 Safety instructions
• Please read the operating instructions prior to set-up of the unit� Ensure that
the product is suitable for your application without any restrictions�
• The unit conforms to the relevant regulations and EC directives�
• Improper or non-intended use may lead to malfunctions of the unit or to
unwanted effects in your application�
• Installation, electrical connection, set-up, operation and maintenance of the unit
must be carried out by qualified personnel authorised by the machine operator�
• The design of the unit corresponds to protection class III (EN61010) except for
the terminal blocks� Protection against accidental contact (safety from finger
contact to IP 20) for qualified personnel is only ensured if the terminals have
been completely inserted� Therefore the unit must always be mounted in a
control cabinet of at least IP 54 which can only be opened using a tool�
• For DC units the external 24 V DC supply must be generated and supplied
according to the requirements for safe extra-low voltage (SELV) since this
voltage is provided near the operating elements and at the terminals for the
supply of sensors without further protection measures�
3 Functions and features
• The diagnostic electronics has 2 analogue inputs and 4 dynamic inputs� These
inputs can be used for process value monitoring, vibration monitoring, vibration
diagnostics or analysis of other dynamic signals�
• An analogue current signal or a pulse signal can be connected to the analogue
inputs� They can be used as speed input for vibration diagnostics, as trigger of
a measurement or for process value monitoring�
Produktspezifikationen
Marke: | IFM |
Kategorie: | Nicht kategorisiert |
Modell: | VSE003 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit IFM VSE003 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert IFM
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
31 Mai 2025
31 Mai 2025
31 Mai 2025
Bedienungsanleitung Nicht kategorisiert
- Vogel's
- Lucide
- MSW
- Heaven Fresh
- Beckmann & Egle
- Color Emajl
- Earthwise
- Tech 21
- Ugolini
- Jordan
- Taqua
- Hecht
- RF-Links
- Edouard Rousseau
- Robust
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025