IFM VSE101 Bedienungsanleitung
IFM
Nicht kategorisiert
VSE101
Lies die bedienungsanleitung für IFM VSE101 (13 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 31 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 16 Bewertungen. Hast du eine Frage zu IFM VSE101 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/13

Operating instructions
Diagnostic electronics
for vibration sensors
VSE101
80289801/00 03/2020
UK

2
Contents
1 Preliminary note 3 ���������������������������������������������������������������������������������������������������
2 Safety instructions 3 �����������������������������������������������������������������������������������������������
3 Functions and features 3 ����������������������������������������������������������������������������������������
4 Installation������������������������������������������������������������������������������������������������������������5
4�1 Installation of the sensors 5 ������������������������������������������������������������������������������
5 Electrical connection 5 ��������������������������������������������������������������������������������������������
5�1 Limited voltage / current 6 ��������������������������������������������������������������������������������
5�2 Wiring�������������������������������������������������������������������������������������������������������������7
5�2�1 Wiring of the sensors 1���4 (S1���S4) according to the sensor 8 ��������������
5�3 Connection of the sensors 8 �����������������������������������������������������������������������������
5�3�1 Monitoring the sensor cable 9 �����������������������������������������������������������������
5�4 IP address 9 ������������������������������������������������������������������������������������������������������
5�5 Ethernet connection 9 ���������������������������������������������������������������������������������������
6 Operation �������������������������������������������������������������������������������������������������������������9
6�1 Settings, parameter setting 10 �������������������������������������������������������������������������
7 Indicators (LEDs) ����������������������������������������������������������������������������������������������� 11
8 Maintenance, repair and disposal 12 ����������������������������������������������������������������������
9 Scale drawing 12 ����������������������������������������������������������������������������������������������������

3
UK
1 Preliminary note
• An instruction is indicated by "►":
Example: ► Mount the unit as shown.
Important note
Non-compliance may result in malfunction or interference�
Information
Supplementary note
2 Safety instructions
• Please read the operating instructions prior to set-up of the unit� Ensure that
the product is suitable for your application without any restrictions�
• The unit conforms to the relevant regulations and EC directives�
• Improper or non-intended use may lead to malfunctions of the unit or to
unwanted effects in your application�
• Installation, electrical connection, set-up, operation and maintenance of the unit
must be carried out by qualified personnel authorised by the machine operator�
• The design of the unit corresponds to protection class III (EN61010) except for
the terminal blocks� Protection against accidental contact (safety from finger
contact to IP 20) for qualified personnel is only ensured if the terminals have
been completely inserted� Therefore the unit must always be mounted in a
control cabinet of at least IP 54 which can only be opened using a tool�
• For DC units the external 24 V DC supply must be generated and supplied
according to the requirements for safe extra-low voltage (SELV) since this
voltage is provided near the operating elements and at the terminals for the
supply of sensors without further protection measures�
3 Functions and features
• The diagnostic electronics has 2 analogue inputs and 4 dynamic inputs� These
inputs can be used for process value monitoring, vibration monitoring, vibration
diagnostics or analysis of other dynamic signals� The final function depends
on the firmware version� The current firmware and operating software can be
downloaded from the download area on ifm electronic's website�
Produktspezifikationen
Marke: | IFM |
Kategorie: | Nicht kategorisiert |
Modell: | VSE101 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit IFM VSE101 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert IFM
25 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
21 Juli 2025
20 Juli 2025
20 Juli 2025
20 Juli 2025
20 Juli 2025
20 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- Atmos
- Berner
- Heinner
- Dali
- Tube-Tech
- Loewe
- Toshiba
- Fissler
- Bellini
- Mach Power
- Satisfyer
- Forge Adour
- EFX
- Finlux
- LVSUN
Neueste Bedienungsanleitung für -Kategorien-
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025