ILive IAT61 Bedienungsanleitung


Lies die bedienungsanleitung für ILive IAT61 (2 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 22 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 11.5 Bewertungen. Hast du eine Frage zu ILive IAT61 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
LED Light Strip
Users Guide for Model IAT61 v2797-01
Back of TV or Monitor
Fold at corners as shown.
Features
Length: 6.5 ft/2M
Width: .4 in/10mm
32 LEDs total (5050 RGB LED)
5V USB power input
Self adhesive, double sided backing
Includes
USB cable with built-in remote receiver
Remote control with CR 2025 battery included
Installation
1. Clean the surface to which you’re going to attach the light strip. The example shown below represents the
back of a TV or computer monitor.
2. Peel the backing strip o the adhesive tape on the LED strip.
3. Press and hold the LED strip to the surface.
4. Connect the USB cable to a USB port on the TV or monitor, or a USB power adapter (not Included).
5. Use the remote to change LED color, brightness, and ash settings.
The remote receiver does not need to be visible or have direct line of sight with the remote, and can be
fully hidden behind your TV, monitor, etc.
You may cut the strip to t smaller areas. Using scissors, cut on the visible line between LEDs.
Connect USB plug
to an available USB
outlet or a USB power
adapter (not included)
The remote receiver is built
into the USB power cable.


Produktspezifikationen

Marke: ILive
Kategorie: Beleuchtung
Modell: IAT61

Brauchst du Hilfe?

Wenn Sie Hilfe mit ILive IAT61 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten