Impact LS-WU-DRHDR Bedienungsanleitung


Lies die bedienungsanleitung für Impact LS-WU-DRHDR (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 22 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 11.5 Bewertungen. Hast du eine Frage zu Impact LS-WU-DRHDR oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
1
Thank you for choosing Impact.
Contents Include
The Impact Windup Double-Riser Heavy-Duty Roller Stand will support large lights, booms, or accessories that weigh up to 168 pounds and hold them securely at up to
11.5 feet. The integrated gear box and a host of safety features let one person safely and easily hoist heavy gear with the included ratchet handle, even when the stand is
supporting its maximum load.
Features include an auto-lock safety pin system that prevents the risers from accidentally descending and geared casters that remain on the oor whether the legs are
opened or closed for easy storage and transport. The stand boasts a 7.5-foot maximum base diameter, ultra-thick risers, and robust aluminum spider casting that will
support heavy loads without wobbling or swaying.
set up, break down, transport, and mount
heavy gear on the stand.
Always spread the legs to their greatest width,
with the leg struts parallel to the oor.
and vertical before use.
Stand
Ratchet handle
8 in. dual-action casters (×3)
M6 hex key
Keep ngers clear of the risers and gear boxes
when raising and lowering the stand.
A tie-down kit is recommended when using the
stand in windy conditions.
Please read and follow these instructions, and
keep this manual in a safe place.
1. Auto-lock release lever
2. 1 1/8 in. junior receiver
3. Tie-down collar
4. 2nd riser
5. Auto-lock slots
6. 2nd riser locking knob
7. 1st riser
8. 1st riser locking knob
9. Upper riser
10. Bubble level
11. Lower spider handle
12. Lower spider locking knob
13. Lower spider casting stop
14. Caster
15. Caster locking hex bolt
16. Caster receiver
17. Receiver locking knob
18. Upper riser gear box
19. Ratchet handle drive
20. Lower riser gear box
21. Ratchet handle
22. Ratchet handle holder
21 3 4 5
6
11
12
16
19
20
18
17
22
21
15
13
14
7
8
9
10
Make sure that this product is intact and that
there are no missing parts.
Do not exceed the maximum load capacity.
All images are for illustrative purposes only.


Produktspezifikationen

Marke: Impact
Kategorie: Nicht kategorisiert
Modell: LS-WU-DRHDR

Brauchst du Hilfe?

Wenn Sie Hilfe mit Impact LS-WU-DRHDR benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten