Indesit DI 653 A Bedienungsanleitung

Indesit Spülmaschine DI 653 A

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Indesit DI 653 A (80 Seiten) in der Kategorie Spülmaschine. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/80

English,1

E N

DISHWASHER

Contents

Installation, 2-3

Positioning and levelling

Connecting the water and electricity supplies

Technical data

Description of the appliance, 4

Overall view

Control panel

Loading the racks, 5

Lower rack

Cutlery basket

Upper rack

Start-up and use, 6

Starting the dishwasher

Loading the detergent

Washing options*

Wash cycles, 7

Wash cycle table

Rinse aid and refined salt, 8

Loading the rinse aid

Loading the refined salt

Care and maintenance, 9

Shutting off the water and electricity supplies

Cleaning the dishwasher

Preventing unpleasant odours

Cleaning the sprayer arms

Cleaning the filters

Leaving the machine unused for extended periods

Precautions and advice, 10

General safety

Disposal

Saving energy and respecting the environment

Troubleshooting, 11

Instruction booklet

Espanol, 12

E S P T

Portuges, 23

Suomi, 67

Dansk, 56Norsk, 34

N O S V

F I

D A

Svenka, 45

DI 653 A

 Keep this instruction manual in a safe place for

future reference. If the appliance is sold, given away

or moved, please ensure the manual is kept with the

machine, so that the new owner may benefit from the

advice contained within it.

 Please read this instruction manual carefully: it

contains important information regarding the safe

installation, use and maintenance of the appliance.

 If the appliance must be moved at any time, keep

it in an upright position; if absolutely necessary, it

may be tilted onto its back.

Positioning and levelling

1. Remove the appliance from all packaging and

check that it has not been damaged during

transportation.

If it has been damaged, contact the retailer and do

not proceed any further with the installation process.

2. Check the dishwasher by placing it so that its

sides or back panel are in contact with the adjacent

cabinets or even with the wall. This appliance can

also be recessed under a single worktop* (

see the

Assembly instruction sheet

3. Position the dishwasher on a level and sturdy floor.

If the floor is uneven, the front feet of the appliance

may be adjusted until it reaches a horizontal position

(the angle of inclination must not exceed 2 degrees).

If the appliance is levelled correctly, it will be more

stable and much less likely to move or cause

vibrations and noise while it is operating.

4. Adjust the height of the rear feet from the front of

the appliance*: use a screwdriver to tighten or

loosen the screws on the lower part of the

dishwasher.

Connecting the water and electricity

supplies

 Connection to the water and electricity supplies

should only be performed by a qualified technician.

 The dishwasher should not stand on top of the

water hoses or the electricity supply cable.

The water inlet (A) and outlet (B) hoses and the

electricity supply cable may be positioned towards

the right or the left in order to achieve the best

possible installation (

see figure

Connecting the water inlet hose

• To a suitable cold water connection point: before

attaching the hose, run the water until it is

perfectly clear so that any impurities that may be

present in the water do not clog the appliance;

after performing this operation, screw the inlet

hose tightly onto a tap with a ¾ gas threaded

connection.

• To a suitable hot water connection point: your

dishwasher may be provided with hot water from

the mains supply (if you have a central heating

system with radiators) provided that it does not

exceed a temperature of 60°C.

Screw the hose to the tap as described for

connection to a cold water supply.

 If the inlet hose is not long enough, contact a

specialist store or an authorised technician (

see

Assistance

 The water pressure must be within the values

indicated in the Technical data table (

see below

 The hose should not be bent or compressed.

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the

water supply in the event of anomalies or leaks from

inside the appliance.

- is provided with a

Water Stop

* safety device, in

other words it has a water inlet hose that consists of

a transparent hose on the outside and a red hose on

the inside: both the hoses can withstand extremely

high pressure. If the internal hose breaks, the

external hose becomes a bright red colour and

carries the water instead, thus avoiding any leakage.

 It is very important to check the external hose

regularly: if it is a bright red colour, it must be

replaced by an authorised technician as soon as

possible (

see Assistance

* Only available in selected models.

148

12083

121168

100

Installation

Connecting the water outlet hose

Connect the outlet hose (without bending it) to a

drain duct with a minimum diameter of 4 cm.

Alternatively, rest it over a sink or tub; the free end

of the hose should not remain immersed in water.

The special plastic

elbow* makes it easier to

find the best layout: fix

the elbow to the wall

securely in order to

prevent the outlet hose

from moving and spilling

the dirty water.

The part of the hose

marked with the letter A

should be between 40 and 100 cm above the ground

(

see figure

 We advise against the use of hose extensions.

Electrical connection

Before inserting the plug into the electrical socket,

make sure that:

• the socket is earthed and complies with current

regulations;

• the socket can withstand the maximum load of

the appliance, which is indicated on the data

plate located on the inside of the door (

see

Description of the appliance

);

• the power supply voltage falls within the values

indicated on the data plate on the inside of the

door;

• the socket is compatible with the plug of the

appliance. If this is not the case, ask an

authorised technician to replace the plug (

see

Assistance

); do not use extension cables or

multiple sockets.

 Once the appliance has been installed, the power

supply cable and the electrical socket should be

easily accessible.

 The cable should not be bent or compressed.

 The cable should be checked regularly and

replaced by authorised technicians only (

see

Assistance

 The Company shall not be held responsible for any

incidents that occur if these regulations are not

observed.

Advice regarding the first wash cycle

After the appliance has been installed, immediately

before running the first wash cycle, completely fill

the salt dispenser with water and add approximately

2 kg of salt (

see Rinse aid and refined salt

). The

water may overflow: this is normal and is not a

cause for concern. It is also normal that the LOW

SALT* indicator light continues to flash for a few

cycles after the salt has been loaded.

Anti-condensation strip*

After installing the dishwasher, open the door and

stick the adhesive transparent strip under the

wooden shelf in order to protect it from any

condensation that may form.

* Only available in selected models.

Dimensions

width 59.5 cm

height 82 cm

depth 57 cm

Capacity 12 standard place-settings

Water supply

pressure

30 Kpa ÷ 1Mpa (0.3 ÷ 10 bar)

4.3 psi – 145 psi

Power supply

voltage See appliance data plate

Total absorbed

power See appliance data plate

Fuse See appliance data plate

This dishwasher conforms to

the following European

Community Directives:

-73/23/EEC dated 19/02/73

(Low Voltage) and subsequent

modifications

-89/336/EEC dated 03/05/89

(Electromagnetic Compatibility)

and subsequent modifications

-97/17/EC (Labelling)

-2002/96/ CE (Waste

Electrical and Electronic

Equipment WEEE)

Technical data

Produktspezifikationen

Marke:	Indesit
Kategorie:	Spülmaschine
Modell:	DI 653 A

Brauchst du Hilfe?

Wenn Sie Hilfe mit Indesit DI 653 A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Spülmaschine Indesit

Indesit UNODUE Bedienungsanleitung

12 Oktober 2024

Indesit DG 6445 W Bedienungsanleitung

22 September 2024

Indesit IDP 147 Bedienungsanleitung

17 September 2024

Indesit DISR 57M96 Z UK Bedienungsanleitung

16 September 2024

Indesit DI 67 (UK) Bedienungsanleitung

11 September 2024

Indesit DG 6145 Bedienungsanleitung

9 September 2024

Indesit D2F HD624 A Bedienungsanleitung

6 September 2024

Indesit I3B L634 X Bedienungsanleitung

5 September 2024

Indesit I3I D741O Bedienungsanleitung

5 September 2024

Indesit Slimline DI9E 2B10 Bedienungsanleitung

4 September 2024

Bedienungsanleitung Spülmaschine

Neueste Bedienungsanleitung für -Kategorien-

Siemens 15 Bedienungsanleitung

12 Dezember 2023

Exquisit EGSP130-E Bedienungsanleitung

11 Mai 2024

BEKO BDFN26530B Bedienungsanleitung

4 Dezember 2024

BEKO BDEN38560CHPA Bedienungsanleitung

4 Dezember 2024

BEKO BDIN16520Q Bedienungsanleitung

4 Dezember 2024

BEKO BDFN15421W Bedienungsanleitung

4 Dezember 2024

BEKO BDIN15320 Bedienungsanleitung

4 Dezember 2024

BEKO BDFS15020B Bedienungsanleitung

4 Dezember 2024

BEKO BDFS15020S Bedienungsanleitung

4 Dezember 2024

BEKO BDFN15421S Bedienungsanleitung

4 Dezember 2024