Infinity FPS-1000 Bedienungsanleitung


Lies die bedienungsanleitung für Infinity FPS-1000 (4 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Infinity FPS-1000 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
Owners Manual
®
Flat-Panel Loudspeaker
FPS-1000
A
BOUT
T
HIS
P
...
I
MPORTANT
!
P
OSITION
W
ITHIN
A R
OOM
W
ILL
S
TRONGLY
I
NFLUENCE
P
ERFORMANCE
...
INTRODUCTION
The Innity FPS-1000 has been designed to oer the look of a custom-
designed, in-wall speaker system in an easy-to-install on-wall product.
Installation simply entails properly mounting your FPS-1000 to any at wall
surface.
Note that the FPS-1000 must be mounted using proper anchoring hardware
(not included). You should ask an installation professional for help if youre
unsure about the safety of your mounting location.
UNPACKING THE PEAKERSS
Check your FPS-1000s carefully. If they have been damaged in transit, report
the damage immediately by calling your dealer and/or the trucking firm that
delivered them.
POSITIONING
Since the location of the FPS-1000s will aect performance, it is essential you
read this section very carefully prior to mounting the speakers. Should you
have any questions relating to their installation, its advisable that you call either
your dealer or Innitys Customer Service Department for advice.
Positioning tips:
When possible, mount your FPS-1000s where there is an unobstructed view of
them from your listening area.
For the best possible stereo-sound presentation, mount your FPS-1000s on the
same wall, about 68 feet apart.
Position the high-frequency drivers (tweeters) as close to ear level as
possible. When this is not possible, you can improve the performance of your
FPS-1000s by aiming the rotatable tweeters toward your main listening area.
2
FPS-1000 Owners Manual
Figure 1.
NOTE: This
wire is at
and about 5/8" wide.
Figure 2.
HOOKUP
Your FPS-1000s are packaged with special at speaker wire. When connecting
your FPS-1000s with this wire, make sure to use correct polarity for the
+ and connections. We suggest using the ribbed conductor for the positive
terminal. See Figure 1.
The at speaker wire allows you to neatly run the wire down/up the wall to
your speakers (see Figure 2). The wires can be painted to better blend in with
your decor.
M FPS-1000OUNTING S
Your FPS-1000s come with four keyhole mounting locations at the rear corners
of the enclosures.
NOTE: The customer is responsible for the correct selection and use of mounting
hardware (available through hardware stores) that is necessary for the safe and
proper wall mounting of the speakers.
FRONT OF FPS-1000
RIGHTLEFT
Receiver/Amplier
L +
R +
Ribbed conductor
REAR OF FPS-1000
+
+
RIGHTLEFT
Receiver/Amplier
L +
R +
Ribbed conductor
FPS-1000 Owners Manual
3


Produktspezifikationen

Marke: Infinity
Kategorie: Lautsprecher
Modell: FPS-1000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Infinity FPS-1000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten