Inkbird INK-IFT03 Bedienungsanleitung
Inkbird
Thermometer
INK-IFT03
Lies die bedienungsanleitung für Inkbird INK-IFT03 (6 Seiten) kostenlos online; sie gehört zur Kategorie Thermometer. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 3.8 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Inkbird INK-IFT03 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/6
I NFR AR ED THERMOMETER
INSTRUCTION
MANUAL
INK-IFT03 GR / INK-IFT03 OR
Specifications
- -1
Product category Infrared Thermometer
Accuracy
≥100℃, ±2 / ≤100℃, ±2℃％
Response time 0.5s.
Emissivity Adjustable , 0.1 to 1.0
Distance to spot ratio 16 : 1
℃/℉ Selection √
Backlight display selection √
Dual laser targeting √
Temperature: 0℃~50℃
Relative humidity: 10~95%RH
High/Low temperature alarm setup
MAX/MIN/AVG/DIF temperature measurement
Function selection
Storage temperature -20~50℃ (-4~122℉)
Operating temperature
0~50℃ (32~122℉)
Power/Power life 9V / about 12 hours
Operating environment
Warning
Do not point laser directly or indirectly(through reflective
surfaces) at someone’s eye.
Operation Instructions
How to turn on the infrared thermometer?
Install batteries, then press the measurement button, the
thermometer will be turned on automatically and displays the
measured temperature.
How to turn off the infrared thermometer?
The thermometer will be turned off automatically 15 seconds
later if no operation is performed on it.
How to measure an object with the infrared
thermometer?
Aim the target, press the measure button to perform a single
measurement, or hold the measure button to perform
continuous measurement.
Note: Please hold the measure button for at least 0.5 seconds
while measuring the temperature of an object.
Distance Spot Ratio
The farther the target is, the larger the measuring point
(measurement area) of the thermometer is. The relationship
between the distance and the measuring point is usually
expressed by the ratio of the distance to the measuring point,
D:S.
The diameter of the target spot area is 3.0cm when you test
from a distance of 36cm, and the thermometers will display the
average temperature of the target spot area with a diameter of
3.0cm.
Function Diagram
Diagram 2
- -2
Diagram 1
Emissivity
Most organic materials, painted or oxidized surfaces have an
emissivity of 0.95(preset in the unit). Inaccurate readings may
result from measuring shiny or polished metal surfaces(for
example,stainless steel or aluminium). To make better accuracy,
cover the measured surface with masking tape or black paint.
Measure the tape or painted surface when the tape or paint
reaches the same temperature of the material underneath.
Please kindly note: Thermometer can not test the
temperature of target objects through across the glass. And
steam, dust, smog will lower the accuracy of testing.
1. LCD
2. backlight
laser/℃℉ button
3. Function button
4. up/down button
5. battery cover
6. measure key
7. laser hole
8. infrared lens
Produktspezifikationen
| Marke: | Inkbird |
| Kategorie: | Thermometer |
| Modell: | INK-IFT03 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Inkbird INK-IFT03 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Thermometer Inkbird
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
Bedienungsanleitung Thermometer
- Comark
- Emerio
- Rossmax
- Eks
- Greisinger
- EMOS
- Clas Ohlson
- Emga
- Veroval
- ProfiCare
- Delta Ohm
- Eurochron
- Fysic
- Premiumful
- Aponorm
Neueste Bedienungsanleitung für -Kategorien-
11 Juli 2025
11 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
9 Juli 2025
8 Juli 2025
6 Juli 2025