INOGENI Remote Bedienungsanleitung


Lies die bedienungsanleitung für INOGENI Remote (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 7 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 4 Bewertungen. Hast du eine Frage zu INOGENI Remote oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
INOGENI REMOTE – User Manual
Version 2.1
July 2022
User manual
How it works?
The is a device that can control the mixing function of INOGENI REMOTE
SHARE2/SHARE2U CAM-300 and the switching function of devices. You just need
to apply correct wiring between the REMOTE and the INOGENI device. You will then be
able to communicate with the device using the push buttons at the top of the device.
For SHARE2
Use a simple RJ45 cable
Do not plug the cable to the LAN
connection of the SHARE2.
Plug it to the RS232 port.
For SHARE2U and CAM-300
Use a RJ45 cable to terminal block plug. a
Do not plug a RJ45 cable between the SHARE 2U or CAM300
device and the REMOTE.
INOGENI device side
Pin 1: Receive
Pin 2: GND
Pin 3: Transmit
Pin 4: 5V supply
REMOTE side
Regarding +5V supply for REMOTE:
Under SHA /SHARE2U and CAM300, make sure to put switch number to ON position. RE2 6
Technical support
If you need any support on how to operate this device, contact us at for further assistance. [email protected]
Contact us
Come visit us if you have special needs or requirements. We are your specialists for custom USB 3.0, HDMI and SDI
professional products tailored to your needs.
INOGENI, Inc.
979 Ave de Bourgogne Suite 530
Québec
G1W 2L4 ) Canada (QC
© Copyright 2022. INOGENI, Inc. All rights reserved.
REMOTE


Produktspezifikationen

Marke: INOGENI
Kategorie: Nicht kategorisiert
Modell: Remote

Brauchst du Hilfe?

Wenn Sie Hilfe mit INOGENI Remote benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten