Intermatic ET90115M Bedienungsanleitung


Lies die bedienungsanleitung für Intermatic ET90115M (48 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 5.5 Bewertungen. Hast du eine Frage zu Intermatic ET90115M oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/48
www.intermatic.com
7777 Winn Road
Spring Grove, IL 60081
Manual No. 158--02010
ET90000 Series
Electronic Timer
Installation and Programming Guide
Do not attempt to install or use your Intermatic product until you have read the safety instructions in this section. Save this
document and keep it in an easily accessible place.
To avoid fire, shock, or death, turn off power at circuit breaker and test that power is off before wiring.
Observe all national and local electrical and safety codes.
Disconnect power when servicing or changing loads.
Alterations or modifications to the device will create a hazard.
Use copper conductors only. Use 10 AWG wire, minimum 105°C for 30 A loads.
For outdoor locations, rainproof or wet location conduit hubs that comply with the requirements of UL 514B Conduit, Tubing,
and Cable Fittings for outdoor use, must be used.
Risk of Fire or Electric Shock
WARNING


Produktspezifikationen

Marke: Intermatic
Kategorie: Nicht kategorisiert
Modell: ET90115M

Brauchst du Hilfe?

Wenn Sie Hilfe mit Intermatic ET90115M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten